Im P***** because the box wont fit in my car. Its slightly out & I now where I went wrong with measuring my trunk. The only way it will go in is if I build the box exactly the same but make the front slanted so that it can squeeze in my trunk. I would also like to decrease the depth from 22in to about 18in max & the width to less than 32in prefebable 28in but still want to get the same tuning frequency etc.
Can some1 help as I just aint getting anywhere with this. I dont know how to use all these calculators etc.
Heres the one Ive just built
top and bottom are 32x22
back is 32x15
front is 27.75x15
left side is 20.5x15
right side is 21.25x15
1st port piece is 17x15
2nd port piece is 21.25x15 TUNED TO 28hz
What do i change to make the front slanted but with a depth of 18in and width under 32in please