Going in a 98-2004 Camaro.. Running an Orion 1200d and a 12" Resonant Engineering SX:
http://subwoofertools.com/forum/port...&Vas=&Fs=&CE=0

Going in a 98-2004 Camaro.. Running an Orion 1200d and a 12" Resonant Engineering SX:
http://subwoofertools.com/forum/port...&Vas=&Fs=&CE=0
::Audio System Setup::
Vehicle: 2007 Mazda RX8
Head unit: Stock
Door Speakers: Stock
Amplifiers: 1 Orion 1200D to sub
Sub: Resonant Engineering SX 12" in a 2cu.ft. ported enclosure tuned to 35hz
Electrical: Stock but Big 3 in 4g.

i think you should cut back a bit on the box size and port width, they go hand in hand if you dont change the length... and i'd cut length too, seeing how its a hatch and its probably going to peak in the 50's or higher...
Team SoundStream - Listen And Feel!
2k5 SLAP Stock 2 National Champion - I feel old...!
Sold - One Acura RSX, 5 years of fun... time for retirement.
I would make the box a little smaller, especially if its a burp box
REFS: Vincent9515, snoopdan, delvryboy, pyro719, teamsubgopoof, coolahan, Toxic Tuan

disregard this post..
Last edited by Basshead808; 10-05-2007 at 10:31 PM.
::Audio System Setup::
Vehicle: 2007 Mazda RX8
Head unit: Stock
Door Speakers: Stock
Amplifiers: 1 Orion 1200D to sub
Sub: Resonant Engineering SX 12" in a 2cu.ft. ported enclosure tuned to 35hz
Electrical: Stock but Big 3 in 4g.

How about this one?
http://subwoofertools.com/forum/port...&Vas=&Fs=&CE=0
::Audio System Setup::
Vehicle: 2007 Mazda RX8
Head unit: Stock
Door Speakers: Stock
Amplifiers: 1 Orion 1200D to sub
Sub: Resonant Engineering SX 12" in a 2cu.ft. ported enclosure tuned to 35hz
Electrical: Stock but Big 3 in 4g.

mission completethanks alot!
::Audio System Setup::
Vehicle: 2007 Mazda RX8
Head unit: Stock
Door Speakers: Stock
Amplifiers: 1 Orion 1200D to sub
Sub: Resonant Engineering SX 12" in a 2cu.ft. ported enclosure tuned to 35hz
Electrical: Stock but Big 3 in 4g.
you should not put a turn in it if its a burp box. aeros are a good thing to use because you can easily change tuning.
My left ear rings. I am retired.
seems like a lot of port area. You can change the xmax number to change the port area...
I'd do 1.5-2 cubes with 2 4" or 1 6" aero.
Ben Hemp
1992 GMC Sonoma Ext Cab NEW BUILD
2008 MECA S1 KY State Champion, 151.0 dB
2008 MECA S1 WorldChampion, 151.8 dB
2010 MECA scores: 150.9 dB S2, 151.6 dB S3
Refs: smd4life, Subst4nce, wccoug21, dacheatham, thegreatestpenn, jshak07
Bookmarks