tunning down my box

[jblayz1]

anyone have any recomendations...

currently outside the box dimensions are:
2.3 CU.FT. PER TUNED 38HZ
Length: 23"
Width: 16"
Height: 14.50"

i don't know the port dimmensions

i would like to get it down to 32HZ-34HZ

[innsanes]

Try stuffing it with 2 lbs of poly fill. that should do the trick. you'll get it down to like 33 or 34 hz

[Stem]

you dont know the port dimensions? lengthen the port openning width a half inch or so

[mlstrass]

Can you extend the port?

[jblayz1]

port dimensions are:

back port length 12"
side port length 12"
port height 13"

port opening inside box 3"
port opening outside box 2.5"

[jblayz1]

by putting a piece of MDF .5" thick 12"x13" along the side port wall i would tune down the box to 33.3HZ, correct? do i not want to make the port narrower?

[jblayz1]

anyone?