building a couple new boxes

[andytb]

well i want to build a couple box

both of the boxes will be 25W x 15.5H x 24D

the first will have 2.5 inch port tuned to 28hz 4 cubic feet

the 2nd will have a 6 inch port tuned to 45hz 3.2 cubic feet.

how do you guys think this will sound i want to hear the difference in the boxes or do you think i should do pretty much the same but have it ported in to the car and seal it off

[andytb]

bump

[Immacomputer]

For what sub? The 6" port enclosure is going to be louder and have less low end. The 2.5" port will sound terrible and you will get a ton of port noise. Assuming here that you're using a sub worth a **** and that you're talking about round port diameters.

[andytb]

no im talking about slot port with a 15 re se on 700 watts

[andytb]

i want to test the different frequencies i built a 3.5 cube box 35 hz and i just want to see first hand on how they sound

[andytb]

ttt

[bassboobs16]

I need the first box you listed

[andytb]

thats cool i will let you know how it sounds compared to the 2nd one. the first one i built was 35hz. i think im gonna port them into the car

[bassboobs16]

I need a box. Im trading a nsb100ft for a realy nice one if you can maybe hook me up

[andytb]

that would be nice but im far from professional. i get the job done but i **** at carpet. im just making these to see what i want to tune my next project to

[bassboobs16]

o ic

[azbass]

how do you guys think this will sound i want to hear the difference in the boxes or do you think i should do pretty much the same but have it ported in to the car and seal it off

build them, then you come back here and tell us.

[andytb]

i will i hope im not dissapointed