1. ## Box tuning?

I just picked up this box for free and i used tuning thing over on bcae1.

to find the tuning of this box using the external dimensions. But id like someone with more experience to double check the tuning for me if you can.

Its a slot ported truck box for a 10" sub outer dimensions are:

Length= 48"
Depth 1= 4.5"
Depth 2= 7.5"
Height= 14.5

thanks for any help

2. ## Re: Box tuning?

you need a port for it to be ported

3. ## Re: Box tuning?

it is ported?

4. ## Re: Box tuning?

You own the box, you tell us! What the ****?

5. ## Re: Box tuning?

i didnt build the box tho all i know is the box outer dimensions and im trying to figure out the tuning of it based off that

6. ## Re: Box tuning?

I dont see where it says the port length, width, and height. Also ur missing the thickness of the wood used.

7. ## Re: Box tuning?

I know the outside port Length is 13" tall and the width is 2" but idk the length inside the box i measure where its mounted at on the outside and it looks to be 22" in length hope that helps

8. ## Re: Box tuning?

No, it doesn't help. We need to know exactly how long it is before we can help you calculate the tuning.

9. ## Re: Box tuning?

well how can i measure it when the box is already build and its a slot port with the port inside

10. ## Re: Box tuning?

I would say it's about 1.5cu.ft @42hz

11. ## Re: Box tuning?

Thanks man i was getting tuning results around that too and was just lookin for a double check thanks

12. ## Re: Box tuning?

Originally Posted by trevor87
well how can i measure it when the box is already build and its a slot port with the port inside
It's really not hard at all. Just take a tape measure and see how long the first port panel is from the front of the box back as far as it goes. Then, measure how long the back port panel is (if there is one) by going through the sub cutout.

Without those dimensions, there is no way to know what it's tuned to. It's bullshit to guess a size and tuning. We also need to know how thick the wood is.

Since I'm pretty sure you're going to fail at getting and naming dimensions, I made an mspaint drawing to show you what we need to calculate the tuning:

Make sure to get the lengths of each of the colored lines. We also need the height of the port. Don't forget wood thickness.

13. ## Re: Box tuning?

13" tall
2" wide
Port length 1 = 4.5" at the bottom 2" at the top since its a slanted truck box
Port Length 2 = 23"
3/4 Mdf Wood

14. ## Re: Box tuning?

Is this basically what it looks like (all of the dimensions are like you said)?

If so, then it is 1 cube tuned to 44hz. Once we have all the necessary information, it takes all of about 5 minutes to figure it out.

15. ## Re: Box tuning?

yep thats it. thanks

## User Tag List

#### Posting Permissions

• You may not post new threads
• You may post replies
• You may post attachments
• You may edit your posts