Closed Thread
Results 1 to 11 of 11

Reload Thread: someone want to design a ported box for fi bl 12

  1. #1
    joelowrider's Avatar
    joelowrider is offline Senior VIP Member



    Join Date
    Oct 2006
    Location
    owensboro, ky
    Posts
    293
    Post Thanks / Like
    Images
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    someone want to design a ported box for fi bl 12

    I am looking for a ported box for fi bl 12in fully loaded

    size has to be max 23 in wide 13in deep and 19in tall
    if that wont work 46 in wide 13 deep and 19 tall for 2

    32 hz
    1.8-2.5 cube ft per sub
    it says 12-16 squre in of vent area per cube ft


    Fs: 38.7 Hz | 37.8 Hz
    Re: 0.75 Ohms/coil | 1.5 Ohms/coil
    Qms: 05.79 | 5.93
    Qes: .39 | .37
    Qts: .37 | .34
    Mms: 177g | 186g
    Cms: 0.96mm/N | 0.96mm/N
    Sd: 481cm^2 | 481cm^2
    Vas: 30.9 l | 30.9 l
    Spl: 88.0dB 1W/1m | 88.4dB 1W/1m
    Bl: 12.8 N/A | 19.0 N/A
    Xmax: 21mm
    Rms: 1000W *
    Sealed box: N/A cuft
    Ported box: 1.8-2.5 cuft @ 30-37Hz
    Sub OD: 12.500”
    Cut ID: 11.125”
    Mounting depth: 6.750”
    Displacement: 0.15cuft
    Last edited by joelowrider; 07-16-2007 at 10:17 PM.







  2. #2
    Tempe's Avatar
    Tempe is offline FI Car Audio FTW!!!



    Join Date
    Jul 2004
    Location
    Gilbert, AZ
    Age
    37
    Posts
    406
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: someone want to design a ported box for fi bl 12

    Vehicle?



    It's been years since I have been really active in car audio forums. I posted a ton about 10 years ago here on caraudio.com, termpro.com, sounddomain.com, caraudioforum.com, and a whole bunch more that I no longer remember. You may remember me. If not, you're probably just young haha. Because of the many years since I've done any selling / buying, the only person I can remember for my references is Team PSI (David Moore).

  3. #3
    joelowrider's Avatar
    joelowrider is offline Senior VIP Member

    Threadstarter


    Join Date
    Oct 2006
    Location
    owensboro, ky
    Posts
    293
    Post Thanks / Like
    Images
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: someone want to design a ported box for fi bl 12

    2003 chevy s-10 ext cab




  4. #4
    joelowrider's Avatar
    joelowrider is offline Senior VIP Member

    Threadstarter


    Join Date
    Oct 2006
    Location
    owensboro, ky
    Posts
    293
    Post Thanks / Like
    Images
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: someone want to design a ported box for fi bl 12

    if someone decides to i wont be back on till the morning just let me know how much you want or pm me
    I thought someone would have jumped on this by now




  5. #5
    rpfuror's Avatar
    rpfuror is offline sound envy



    Join Date
    Oct 2005
    Location
    MD
    Posts
    695
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    3 Post(s)

    Re: someone want to design a ported box for fi bl 12

    Box Width: 32.00 inches
    Box Height: 19.00 inches
    Box Depth: 13.00 inches
    Slot Vent Width: 2.00 inches
    Slot Vent Length: 32.00 inches

    Net Volume: 2.47 cu/ft
    Tuning Freq: 32.16 Hz
    Port Area: 35.00 sq/in

    let me know if you want a drawing



    **rpfuror_designs**
    ** Ask me about box design and construction **

    Build: bigmike8771, bama350z, nismos14, speedyg76, onnoff7, orioles26, Airman21

    Design: RFmustang, e22s, Platestacker45, lilgator, diminishedpower, hannibal05

    Buy/Sell: 00maxima, Flyhalf, CaliforniabOY5, angrytrucker78, shawnfleming, dre2390 , IM IN HERE, Spellman, LazyRider, mikescanlon, AZ-ss, BLD 25, x1le woofercooker, Twisted_0912

  6. #6
    joelowrider's Avatar
    joelowrider is offline Senior VIP Member

    Threadstarter


    Join Date
    Oct 2006
    Location
    owensboro, ky
    Posts
    293
    Post Thanks / Like
    Images
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: someone want to design a ported box for fi bl 12

    thats only 2.4 cube it needs to be 1.8 to 2.5 per sub




  7. #7
    Qbenjamin's Avatar
    Qbenjamin is offline CarAudio.com Veteran



    Join Date
    Jan 2007
    Location
    London, UK
    Posts
    3,502
    Post Thanks / Like
    Images
    6
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    3 Post(s)

    Re: someone want to design a ported box for fi bl 12

    Quote Originally Posted by joelowrider View Post
    thats only 2.4 cube it needs to be 1.8 to 2.5 per sub
    That's because you didn't say that you had two drivers.

    PM: IonSQL




    Sold to Ref's: IonSQL; envengineer; BAD_MAYHEM; oxsign; dvrmstrng; corto; wong05tsx; mrdurden; dirtyg; Cheesemind; gladiator_jai; bumpincrv; nycking23; slikvik; Mr.Ronin_2U
    Traded with Ref's:: Spike_e; jnoel; Sundownz

    Stock H/U; AudioControl Lc6i; Alpine PDX-V9; Focal Components & Coaxials; DD 2510; Ported Enclosure; Second Skin Damplifier Pro

    What sounds good to you, may sound like crap to me...

  8. #8
    joelowrider's Avatar
    joelowrider is offline Senior VIP Member

    Threadstarter


    Join Date
    Oct 2006
    Location
    owensboro, ky
    Posts
    293
    Post Thanks / Like
    Images
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: someone want to design a ported box for fi bl 12

    i did but not real clearly i edited the top tough




  9. #9
    prodgod's Avatar
    prodgod is offline Bored



    Join Date
    Feb 2007
    Location
    C-Town, WI
    Age
    25
    Posts
    329
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: someone want to design a ported box for fi bl 12

    Here's One

    Swick



    1977 MGB - Current Project Car
    HU - Kenwood KDC-MP825
    Front Stage - Infinity Kappa 5.25" Rear Fill - Infinity Kappa 5x7"
    Sub Stage - Elemental Designs 9kv.2
    Amp - Rockford Fosgate 5.3x Wiring - Scosche 4 Gauge

    2000 Mitsubishi Eclipse GT
    HU - Kenwood DDX512
    Front Stage - Kicker RS65.2
    Substage - 2 x Eclipse SW6000 10" Sealed
    Amp - Rockford Fosgate Power-1000 25-To-Life Wiring - KnuKnoceptz 1/0

    Refs: lrc131, Hemi=22s, Tub Asko (SMD.com), poundindak69, us3, thegreatestpenn, BumpinLTC

  10. #10
    rpfuror's Avatar
    rpfuror is offline sound envy



    Join Date
    Oct 2005
    Location
    MD
    Posts
    695
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    3 Post(s)

    Re: someone want to design a ported box for fi bl 12

    Yea, I read 1... No way your getting enough space for 2 of them with out block the port.



    **rpfuror_designs**
    ** Ask me about box design and construction **

    Build: bigmike8771, bama350z, nismos14, speedyg76, onnoff7, orioles26, Airman21

    Design: RFmustang, e22s, Platestacker45, lilgator, diminishedpower, hannibal05

    Buy/Sell: 00maxima, Flyhalf, CaliforniabOY5, angrytrucker78, shawnfleming, dre2390 , IM IN HERE, Spellman, LazyRider, mikescanlon, AZ-ss, BLD 25, x1le woofercooker, Twisted_0912

  11. #11
    joelowrider's Avatar
    joelowrider is offline Senior VIP Member

    Threadstarter


    Join Date
    Oct 2006
    Location
    owensboro, ky
    Posts
    293
    Post Thanks / Like
    Images
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: someone want to design a ported box for fi bl 12

    thanks that worked great




Closed Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum