question on box tuning and RE box builder
No im trying to tune a box for a fully loaded btl 15, lookin at 4.5 cu ft after displacements @ 45-48 hz, mainly for SPL. now im having a problem with the RE Box builder. Im attempting to build a box with these specs:::
Width 33
Height 17.5
Depth 21.5
i want the port width to be 5 inches, yet it wont let me change the port length 1, or how long the port goes in, thus keeping the tuning low. Is there a way that someone could give me a certain amount of port area for this sub to be tuned at 45 hz? Thanks
Dustin
refs: zeuslicious(Christian)x8---nomad40---shallowfu---adio---pioneerpimp---fiercetimbo17---hayden---BLD 25--flakko---R-sosa----denim---woc47----lilmaniac2(Chad Kevin motha ****in Hicks)----newtitan---IgnoreMe(George)---JBGabriel---BuddyChrist----KingRanch---assman---MitchZ---JoeSmith502---The Low x2---Fiery---dragnix---tapout -383---splguru---sq wat 4---PimpDaddyq---Mr_Imperial---AbsoluteAudio---KHARPS---Sotelomichael---dt053---cmobley---SomeDonnieDude---ax600---SQcrewcab--Zachfeen--Power-Fanatic07--t4r505--
"You almost had me? You never had your subs. Ask any bass racer. Any true bass racer. Its not about how much a piece of equipment costs. Its how you install it."
Register To Reply
Bookmarks