Closed Thread
Results 1 to 5 of 5

Reload Thread: I start my box tomorrow

  1. #1
    TheGreatMonkey's Avatar
    TheGreatMonkey is offline I'm The Monkey Master



    Join Date
    Apr 2006
    Location
    Somewhere
    Posts
    119
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    I start my box tomorrow

    So after looking around and what not, i've decided to go with a 5.5 cu ft net @ 34Hz for 2 Kicker L7 12". My box is 45x15x22. With a port width of 5.75 and Port Area of 77.625 square inches. Along with 25.5" port length. So does this look alright? But anyways, this is my 1st time building a box. Knowing me, i'll probably screw something up lol.



    2006 Dodge Dakota ST 4x4 Black


    Headunit: Clarion DXZ785USB *Sony CDX-GT330 Temp cause UPS lost my Clarion*
    Speakers: Alpine SPX-17REF
    Speaker Amp: Kicker ZX350.2
    Sub: 2 Kicker L7 12" *2 Alpine Type R 12" Temp*
    Sub Amp: 2 Kicker 750.1 *Alpine MRD-M501 Temp*
    Sub Box: 2 4.5 CuFt @ 34Hz
    Wiring: KnuKonceptz

    Sold To: Blimblam




  2. #2
    05gliguy's Avatar
    05gliguy is offline CarAudio.com Elite



    Join Date
    Jan 2007
    Location
    Olive Branch, MS
    Posts
    1,278
    Post Thanks / Like
    Images
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: I start my box tomorrow

    Sounds good... Why didn't you want to make them in seperate chambers with their own port? Not enough room?



    2008 USACi World Finals, 2nd Place Stock 601-1800
    2007 USACi World Finals, 4th Place Stock 601-1800
    Team Sweep
    Team Kicker
    Team Cactus Sounds

    Refs: shiipseki, VarsityBumper, btnhfan, 02parkave, oxsign, Toxic Tuan, djman37, goose2, revrider1, Intensity, FI15INCH, Mazdaspl, vitveet, solo1, KickerRex


  3. #3
    TheGreatMonkey's Avatar
    TheGreatMonkey is offline I'm The Monkey Master

    Threadstarter


    Join Date
    Apr 2006
    Location
    Somewhere
    Posts
    119
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: I start my box tomorrow

    I never started my box yet due to the fact I got called into work. So i'll be starting early in the morning. Now what will I need to hold this box together? I have have 3" screws that have a dual grip. A large one and then a small one. Then I have some carpenters glue. Will there be anything else that I need?



    2006 Dodge Dakota ST 4x4 Black


    Headunit: Clarion DXZ785USB *Sony CDX-GT330 Temp cause UPS lost my Clarion*
    Speakers: Alpine SPX-17REF
    Speaker Amp: Kicker ZX350.2
    Sub: 2 Kicker L7 12" *2 Alpine Type R 12" Temp*
    Sub Amp: 2 Kicker 750.1 *Alpine MRD-M501 Temp*
    Sub Box: 2 4.5 CuFt @ 34Hz
    Wiring: KnuKonceptz

    Sold To: Blimblam

  4. #4
    blackbonnie's Avatar
    blackbonnie is offline The Revolution



    Join Date
    Jan 2007
    Location
    Grand Rapids, MI
    Posts
    10,146
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: I start my box tomorrow

    silicone sealant for the inside edges, and corners.



    HU - Pioneer 800prs
    Mids - Peerless HDS nomex 6.5's
    Highs - Seas Prestige Alumi-domes
    Front Stage Amp - Sundown 100.4D
    Sub - SA-12
    Sub Amp - Saz-1000D
    Wire - Knukonceptz, Kicker Hyperflex

    Blackbonnie References/Feedback

  5. #5
    TheGreatMonkey's Avatar
    TheGreatMonkey is offline I'm The Monkey Master

    Threadstarter


    Join Date
    Apr 2006
    Location
    Somewhere
    Posts
    119
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: I start my box tomorrow

    So today I was finally able to cut my piece out. Due to the fact that almost everytime I tried to cut my pieces, it would rain. So then today I decided to take cut the pieces at my work, in the carpentry shop. So I cut the top and bottom. It didn't go so well with them. They are the same size but since I was doing it by myself, I have a little dip in one of them. I hope this don't affect anything. Then I start cutting my other pieces and notice that I won't be able to make one piece. So yeah. So either tomorrow or Fri, i'll go buy another sheet and make the piece and maybe redo that other piece with the dip in it. What I mean by dip is, the edge has the dip. It was really hard keeping it right up to the fence when your working by yourself. I'll get pics of how the box is right away. Batteries are almost done recharging.



    2006 Dodge Dakota ST 4x4 Black


    Headunit: Clarion DXZ785USB *Sony CDX-GT330 Temp cause UPS lost my Clarion*
    Speakers: Alpine SPX-17REF
    Speaker Amp: Kicker ZX350.2
    Sub: 2 Kicker L7 12" *2 Alpine Type R 12" Temp*
    Sub Amp: 2 Kicker 750.1 *Alpine MRD-M501 Temp*
    Sub Box: 2 4.5 CuFt @ 34Hz
    Wiring: KnuKonceptz

    Sold To: Blimblam

Closed Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum