User Tag List

Closed Thread
Results 1 to 11 of 11

Reload Thread: Will my box work if so witch one 56k W

  1. #1
    SLIM3001's Avatar
    SLIM3001 is offline I love bass



    Join Date
    Jan 2007
    Location
    GB
    Posts
    129
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Icon14 Will my box work if so witch one 56k W

    Hi could you guys help me out pls im so lost it's crazy

    I wont to know if my box look's right and will work with the port being in the center. I have put the port in the center so if can fire out the SKI hatch as the car is a saloon.
    The Sub is a RE v3 xxx 15

    H Height W Width D Depth

    Box 1
    H17 X W 35 X D16
    round port
    W6 X D10
    This should work out to 4.1 CU'FT NET tuned to 35.42HZ


    Box 2
    H17 X W 35 X D15
    round port
    W6 X D11
    This should work out to 3.785 CU'FT NET tuned to 35.79HZ

    Box 1 & 2 will share the same design


    Box 3
    H15 X W35 X D16
    Round port
    W6 X D13
    This should work out to 3.485 CU'FT NET tuned to 35.28HZ

    Box 4
    H16 X W35 X D16
    Round port
    W6 X D11
    This should work out to 3.804 CU'FT NET tuned to 35.7HZ

    Box 5
    H16 X W35 X D15
    Round port
    W6 x D13
    This should work out to 3.485 CU'FT NET tuned to 35.28HZ

    Box 3,4 & 5 will share the same design




    Thank's







  2. #2
    hypnotiq's Avatar
    hypnotiq is offline Beatin down the block..



    Join Date
    Mar 2007
    Location
    Chi-rock
    Posts
    201
    Post Thanks / Like
    Images
    6
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Will my box work if so witch one 56k W

    question.. what program is used to make that ^^ there..?



    "You can always tell a deep bump from a cheap bump."- Hypnotiq

  3. #3
    Pop da Hatch's Avatar
    Pop da Hatch is offline Can haz?



    Join Date
    Jun 2005
    Location
    Minnesota/North Dakota
    Age
    28
    Posts
    3,578
    Post Thanks / Like
    Images
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Will my box work if so witch one 56k W

    Box 2




  4. #4
    SLIM3001's Avatar
    SLIM3001 is offline I love bass

    Threadstarter


    Join Date
    Jan 2007
    Location
    GB
    Posts
    129
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Will my box work if so witch one 56k W

    ( HYPNOTIQ ) The program is Sketchup

    ( POP DA HATCH ) Why you say number 2 ?

    So is it ok the port being in the center of the box then ?

    all so what would be best to use to hold it in place ?




  5. #5
    helotaxi's Avatar
    helotaxi is offline Kilroy was Here



    Join Date
    Dec 2003
    Location
    South Central (New Mexico that is...)
    Age
    39
    Posts
    8,933
    Post Thanks / Like
    Images
    4
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Will my box work if so witch one 56k W

    How much space is between the end of the port and the wall of the box? If it is less than the diameter of the port, you might encounter some tuning problems.



    Artificial Intelligence is no match for Natural Stupidity.

    Never underestimate the power of stupid people in large numbers.

    Life's tough...it's even tougher when you're stupid.

  6. #6
    SLIM3001's Avatar
    SLIM3001 is offline I love bass

    Threadstarter


    Join Date
    Jan 2007
    Location
    GB
    Posts
    129
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Will my box work if so witch one 56k W

    Quote Originally Posted by helotaxi View Post
    How much space is between the end of the port and the wall of the box? If it is less than the diameter of the port, you might encounter some tuning problems.

    Box 1 has 6 inch

    box 2 has 5 inch

    box 3 has 3 inch

    box 4 has 5 inch

    box 5 has 3 inch

    i did not think with a Aero port you would have the same problem as with slot port

    When i put the design's in to BBP i dont seem to get any port noise




  7. #7
    CRAZYCORNUTS18's Avatar
    CRAZYCORNUTS18 is offline Registered User



    Join Date
    Mar 2007
    Location
    PAT
    Age
    25
    Posts
    1,878
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Will my box work if so witch one 56k W

    isnt it better to have the port facing the same way as the sub? correct me if im wrong




  8. #8
    SLIM3001's Avatar
    SLIM3001 is offline I love bass

    Threadstarter


    Join Date
    Jan 2007
    Location
    GB
    Posts
    129
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Will my box work if so witch one 56k W

    dont think it matter's to much with aero port's dont realy know




  9. #9
    helotaxi's Avatar
    helotaxi is offline Kilroy was Here



    Join Date
    Dec 2003
    Location
    South Central (New Mexico that is...)
    Age
    39
    Posts
    8,933
    Post Thanks / Like
    Images
    4
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Will my box work if so witch one 56k W

    Quote Originally Posted by SLIM3001 View Post
    Box 1 has 6 inch

    box 2 has 5 inch

    box 3 has 3 inch

    box 4 has 5 inch

    box 5 has 3 inch

    i did not think with a Aero port you would have the same problem as with slot port

    When i put the design's in to BBP i dont seem to get any port noise
    Does BBP allow you to do a full on design including the dimensions and port placement and figure that into tuning and noise calculations? I don't think that it does. The open end of the port needs to be relatively free of obstruction for at least it's diameter for the tuning calcs to be right. Also does BBP do a full accounting of the size and design of hte flare in an aeroport? I don't know I don't have it.



    Artificial Intelligence is no match for Natural Stupidity.

    Never underestimate the power of stupid people in large numbers.

    Life's tough...it's even tougher when you're stupid.

  10. #10
    SLIM3001's Avatar
    SLIM3001 is offline I love bass

    Threadstarter


    Join Date
    Jan 2007
    Location
    GB
    Posts
    129
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Will my box work if so witch one 56k W

    Quote Originally Posted by helotaxi View Post
    Does BBP allow you to do a full on design including the dimensions and port placement and figure that into tuning and noise calculations? I don't think that it does. The open end of the port needs to be relatively free of obstruction for at least it's diameter for the tuning calcs to be right. Also does BBP do a full accounting of the size and design of hte flare in an aeroport? I don't know I don't have it.

    BBP dont let you do a lot realy just type in what you you wont to use and go from there it dont realy do to much.




  11. #11
    SLIM3001's Avatar
    SLIM3001 is offline I love bass

    Threadstarter


    Join Date
    Jan 2007
    Location
    GB
    Posts
    129
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Will my box work if so witch one 56k W

    look's like im going to have to drop the ider of a center firing port.

    MOD pls close
    thanks




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum