What enclosuer for 2 type R 12" dual 2ohms?

[skullsmasher]

I am running them off a RF p6002 amp.

I want to get bass that is firstly hard hitting, but secondly, loud.

What type of enclosure shuold I get or how should I desing it? I have plenty of MDF.

[blackbonnie]

i say go ported first off

[skullsmasher]

i say go ported first off

which means...........?


So shoudl I have a box with both subs seperated but ported in each divided part of the enclosure?

How would I port the enclosure?

[jeremiah]

which means...........?


So shoudl I have a box with both subs seperated but ported in each divided part of the enclosure?

How would I port the enclosure?

try this http://www.subwoofertools.com/forum/...&Vas=&Fs=&CE=0

[azimuth]

off the topic of the box....you are way under powering those subs. 600 watts is barely enough for 1 R.

[skullsmasher]

off the topic of the box....you are way under powering those subs. 600 watts is barely enough for 1 R.

Yea I just realized that, dumb me.

wanna recomend an amp that should be adequate but not too much ?

[azimuth]

you may have messed up by going with dual 2 ohm coils. you can go . 5 ohms, 4 ohms or 2 x 2 ohms. you will have to spend a little more on power.

[skullsmasher]

well what might work well that isnt like a million dollars?

[skullsmasher]

I jut realized you got the same truck as me with the same subs ....... cool.

[azimuth]

i made a mistake by the way. it's .5 ohms, 2 ohms or 2 X 4 ohms. i apologize.

[skullsmasher]

i made a mistake by the way. it's .5 ohms, 2 ohms or 2 X 4 ohms. i apologize.

Uh, you'll have to excuse me cause I know very littel about this ****.....

What do you mean by those numbers? Sorry......

[azimuth]

those are your wiring options for ohm loads. when you wire the coils and the subs together, that's what you'll get. you need an amp that does at least 1000 and is stable at one of those ohm ratings.

[skullsmasher]

those are your wiring options for ohm loads. when you wire the coils and the subs together, that's what you'll get. you need an amp that does at least 1000 and is stable at one of those ohm ratings.

well the p6002 at least will be ok, though it is not enough power really right? It shouldnt **** anything up......?

[azimuth]

if you set the gains right, it'll be ok. you won't hit the R's very hard with it though. mine are getting 1400 rms. with this amp, which will not work with dual 2 ohm coils.
http://cgi.ebay.com/PRECISION-POWER-...QQcmdZViewItem

[azimuth]

this amp would push them pretty good.
http://cgi.ebay.com/HIFONICS-BXi2006...QQcmdZViewItem