Does this schematic apply for 2 subs?

[c_hayhurst]

Does the attached schematic also work if I were to put two 12" subs in it as well, or would further adjustments need to be made?

[Immacomputer]

It could be if the subs you're putting in it fit the specs well. Each sub would need to perform well in half the airspace of the enclosure though.

[h17250x]

that design only shows one woofer opening so i would assume that if you want 2 subs you can either build two boxes or find a different design that uses 2 subs

[Immacomputer]

The cutout on the picture has NOTHING to do with the design. If that design was for 3 cubic feet tuned to 32hz and you had two subs that would work well in 1.5 cubic feet tuned to 32hz, that enclosure would hold both of them very well.

[Trixter]

you subs would need about 1cu' of air space and 25sq" of port each...then it would work.

[rpfuror]

the tuning may be a little off depending on the displacement of the drivers. As you add drivers you will take net volume away from what they see, in turn increasing the tuning frequency.

[JoeRa22]

The baffle is only 19" wide, you need around 25" wide for 2 12"s.

edit: never mind, i didn't see the other 13"

[btlking]

The baffle is only 19" wide, you need around 25" wide for 2 12"s.

i was hoping someone would cath that