Closed Thread
Page 1 of 4 1 2 3 4 LastLast
Results 1 to 15 of 58

Reload Thread: 06 Mustang Build log. Fiberglass Pics.

  1. #1
    lrgnation's Avatar
    lrgnation is offline CarAudio.com Elite



    Join Date
    Apr 2006
    Location
    teh yay
    Age
    25
    Posts
    775
    Post Thanks / Like
    Mentioned
    0 Post(s)

    06 Mustang Build log. Fiberglass Pics.

    This is the gear going into it.
    500/1
    300/4
    Audiocontrol LC6
    Fiberglass amp enclosure
    Fiberglass Sub for single 12" (FI SSD, RE SE, SI BM, SS RLP)
    Fiberglass trunklid cover with LC6 mounted in the center.

    My car im starting with..


    I had my girlfriend tape/foil the area where the amps are going


    Then I layed out where I kinda want the amps, They are going to be flush mounted.




    Heres a shot of the inside with the factory look I want to keep.


    Heres the doors that might house a frontstage with some CDT's 6.5, 4" mids, and tweets.



    Here is the trunk Lid that I am going to mount and fabricate the LC6 to.


    And here is the Fiberglass shell I Have made so far with about 4 layers or so of 3/4oz mat. So far this is used almost 3/4 of a gallon of resin.. Remember this is my first time It is possible I am doing it wrong...






    I am going to a few more layers and trim it down and fit in there so its able to be held in place somehow.

    I have about 10 yards of fiberglass and im going to order 2 more gallons of Resin from US composites.

    I also am going to order distro block, 3 2ch 4m rca's, 10ft of 12ga wire, ring terminals from knukonceptz. And I already have enough 4ga laying around.
    Last edited by lrgnation; 02-19-2007 at 02:21 AM. Reason: Wrong IMG TAGS!







  2. #2
    Fast1one's Avatar
    Fast1one is offline CarAudio.com Veteran



    Join Date
    Apr 2006
    Location
    California
    Posts
    4,628
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    You cant use HTTP here...use img codes for images...



    References: Lax916, AcidicDreams , Altima98 , mr Tibbs, Majette, giantgloworm, mattmcss, riogigalo, mysilver02alty, Woc47, Hintzyboy, oglejust, APitBullT, foreman, jhubbell, tmcilroy, pioneerpimp, Dre_ATL

    Plus a ton more I never added, lol. If you are not on the list and you had a pleasant transaction with me, PM me!!!

  3. #3
    ThomasG's Avatar
    ThomasG is offline CarAudio.com Veteran



    Join Date
    Sep 2006
    Location
    Sick Lake city
    Posts
    6,126
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    Quote Originally Posted by Fast1one View Post
    You cant use HTTP here...use img codes for images...
    what he said



    My Feed-Back Thread

    Glass Pipes For Sale



    R.I.P Nikki(Sister) I'll love you forever and always



    Epilepsy Therapy Project

  4. #4
    lrgnation's Avatar
    lrgnation is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Apr 2006
    Location
    teh yay
    Age
    25
    Posts
    775
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    Quote Originally Posted by Fast1one View Post
    You cant use HTTP here...use img codes for images...

    Quote Originally Posted by Little_Thumper View Post
    what he said
    Fixed..




  5. #5
    coolahan's Avatar
    coolahan is offline 141.6 dB @ 36hz



    Join Date
    Jul 2006
    Location
    Oklahoma
    Posts
    1,268
    Post Thanks / Like
    Images
    1
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    cant wait



    - Kyle

    No system for the moment

    REFs
    sundownz, teamquakecelica, stuckinok, fosgaholic218, xtremesplokc, Smoknum, MillzThaYungin, iagrdshaka, Derek Irby, AlpineAndy, reed dollaz

  6. #6
    supa_c's Avatar
    supa_c is offline Abministrator



    Join Date
    Apr 2004
    Location
    In a chair
    Posts
    19,367
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    For your first time its not to bad but you need to get rid of the bubbles, they weaken the structure.
    I reccomend using the chop mat because its eaiser for bumpier surfaces. Its harder to work with but it conforms better than the cloth.
    As far as resin goes best stuff i found was Bondo. Its cheap and it dries really fast.
    I think wal mart sells it for the cheapest.
    Nice job on getting the GF to do the foil, that job *****.
    P.S
    If you havent already bought a subwoofer ive got a bunch of brand new tc9 based 12's i could sell you. It wouldnt even be close to $250 either




  7. #7
    lrgnation's Avatar
    lrgnation is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Apr 2006
    Location
    teh yay
    Age
    25
    Posts
    775
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    Quote Originally Posted by supa_c View Post
    For your first time its not to bad but you need to get rid of the bubbles, they weaken the structure.
    I reccomend using the chop mat because its eaiser for bumpier surfaces. Its harder to work with but it conforms better than the cloth.
    As far as resin goes best stuff i found was Bondo. Its cheap and it dries really fast.
    I think wal mart sells it for the cheapest.
    Nice job on getting the GF to do the foil, that job *****.
    P.S
    If you havent already bought a subwoofer ive got a bunch of brand new tc9 based 12's i could sell you. It wouldnt even be close to $250 either
    I Figured out how many bubbles I had the day after I did it. So on the next coats I tried getting them out and making it a lot better. I just cut the glass into like 3x4 pieces. I did the back of this amp rack structure first because its not going to be seen and gives me a little practice.

    Okay i'll let you know about the tc-9 subs. Im running low on money during this project. So I am going to have to wait a little for the sub.




  8. #8
    lrgnation's Avatar
    lrgnation is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Apr 2006
    Location
    teh yay
    Age
    25
    Posts
    775
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    UPDATE:
    Equipment Going to Be Purchased

    *knukonceptz $160 Shipped*
    -------15ft 1/0 ga
    -------3 2m rca's
    -------3way distro block 40/40/50
    -------100ft 16ga speaker wire
    -------1/0ga Fuse Holder


    *Second Skin $300 Shipped*
    -80sq ft damplifier
    -2 sheet overkill pro
    -1 can spray adhesive

    *FI Car Audio SSD 12" Subwoofer $190 Shipped*


    *CDT $700* Shipped
    ------es-07
    ------es-01
    ------es-04

    *Jl Audio 300/4 Amplifier $250*

    *Alpine IVA-W200 Indash Nav/Dvd $750*

    *Alpine Video Bypass for IVA-W200 $30*

    *Alpine KCE-422i Ipod Cable $35*

    *Alpine PAX-H701 Processor $400*

    --------------------------------------------------------------------------------------------------------

    Going to go ahead and take back the LC6 unless anyone wants to purchase it BNIB for $130.

    Going to be running the es 3 way active off two 300/4's.
    FI SSD 12" or JL w6 off a 500/1.
    Active setup being controlled by the h701.

    Here are some pics of the current stock 3 way setup.






    The Rubber Seal into the door to house 3 pairs of wire. Has huge amounts of room and for the first time is easily accessible.





    Refs: BigDave4, DjDilliodon, Spddracer, Boyle465

  9. #9
    SEVEN_ELEVEN's Avatar
    SEVEN_ELEVEN is offline Senior VIP Member



    Join Date
    Oct 2006
    Location
    Leavenworth, KS
    Posts
    208
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    Sweet car man



    2 12'' Comp VR's
    Power Acoustik 2400dB Amp
    3.8 Cubes ported Behind my '96 F-150's bench seat

    Pics so far:
    http://www.caraudio.com/forum/showthread.php?t=193264

  10. #10
    baseballer1100's Avatar
    baseballer1100 is offline My life be like....



    Join Date
    Aug 2005
    Location
    Kentucky
    Age
    25
    Posts
    7,263
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    Your girlfriend is ******.



    References:
    Caraudio.com
    Luckyt,Hotown,Thunder9500,Vladd,Mikeyb,kngoftheprk nglot, cd6551(x3),bolognabake,dalucifer,phrozen5100, frito,bring97, avs20,Resonant18,djman37,Showrides,Fi car audio(X2),jeeper07(x2),pimpedout97x,matrxx dude(x3),flakko(x2),mega1268,powernaudio,iamamp3pi mp.bamaboy,Daishi(x3).angrytrucker78,impalafan95.n etherland, down,blue200sx(x2),QtrHorseThecybe,jiggy2dmax,stc1 709,musclehead,NDMstang65v2,alxmlr789
    Carstereos.org
    Wackii,BrownNoiseBob
    Explorer4x4.com
    Fordexplorer157
    Mp3car.com
    StLB5,Coolskys05
    I know there is more ill try to find them.

  11. #11
    kicker06's Avatar
    kicker06 is offline Umm, I don't pay for food



    Join Date
    Apr 2006
    Location
    Atlanta & South Carolina
    Posts
    2,172
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    bitch get in my trunk!

    but yea, my friend has those same rims on his 240sx. 19's right?



    '02 Dodge Intrepid SE

    Refs: Shon (owner of ROE) x2, Tony (on ROE), DL97, Armageddon, uncfanforlife07, Shawn Fleming, Toxic Tuan, jybfan04 and 65 More

  12. #12
    blackbonnie's Avatar
    blackbonnie is offline The Revolution



    Join Date
    Jan 2007
    Location
    Grand Rapids, MI
    Posts
    10,146
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    lookin good so far, risky install on that new of a car. ecspecially if you mess up, lol



    HU - Pioneer 800prs
    Mids - Peerless HDS nomex 6.5's
    Highs - Seas Prestige Alumi-domes
    Front Stage Amp - Sundown 100.4D
    Sub - SA-12
    Sub Amp - Saz-1000D
    Wire - Knukonceptz, Kicker Hyperflex

    Blackbonnie References/Feedback

  13. #13
    PowerNaudio's Avatar
    PowerNaudio is offline the power of audio



    Join Date
    May 2005
    Location
    killeen, TX
    Posts
    1,876
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    i dig the system bro.
    keep the install pics coming.




    AIM:powernaudio,yahoo:powernaudio,email address: powernaudio at gmail.com contact me if you need any help.

    Portafolio
    builds
    more builds
    saturn l300 build
    videos

    References:Mr.Loki,dubbinjet,trucktoy,fancynapkin, netherland,Datdudedru,hockey1playa33,
    donbon86,PhatTonyDeMar,Saywhat?,vosschs,ChuckKlock er,budlightman361,baseballer1100,elslug,
    bdogg321,projectpat06,eatank,BodegaBay,playboyclic ,cbrrocketrdr,iwanturmags,pboulos,DaBeholder,
    bholtmeier,beatthis27,OldManTod,MTXman,Gianotti.

  14. #14
    lrgnation's Avatar
    lrgnation is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Apr 2006
    Location
    teh yay
    Age
    25
    Posts
    775
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    I am trying to keep the pics all coming thanks for all the support.

    Kind of a slow build because Of the money thing... But hope to be done soon!





    Refs: BigDave4, DjDilliodon, Spddracer, Boyle465

  15. #15
    btnhfan's Avatar
    btnhfan is offline Hail to the King Baby!!!!



    Join Date
    Jan 2004
    Location
    CT/ GA Tech, Atlanta
    Age
    26
    Posts
    7,067
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 06 Mustang Build log. Fiberglass Pics.

    Seems like you have a good plan going.

    Keep it updated.



    Best receiver ever?
    I think so

Closed Thread
Page 1 of 4 1 2 3 4 LastLast

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum