Closed Thread
Results 1 to 7 of 7

Reload Thread: cansomebody help figure box PLEASE!!

  1. #1
    sslacker's Avatar
    sslacker is offline Street Beat!!!



    Join Date
    May 2006
    Location
    In a van down by the river
    Posts
    37
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    cansomebody help figure box PLEASE!!

    not very good with math but could someone tell me how many square ft. the enclosure is and tuning frequency if i give the measurments?? Thanks


    The box is 34" wide by 16"high, 22 " deep!!!!


    The port is 6" wide 16" high and will be 16" deep!!


    looking to tune about 36-38 hertz, just trying to see if I am close!!!
    Thanks for the response!!!

    These are internal dimensions by the way!!
    Last edited by sslacker; 02-13-2007 at 06:33 PM. Reason: wrong dimensions on port







  2. #2
    Join Date
    Oct 2005
    Location
    Beatrice, NE
    Age
    27
    Posts
    654
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: cansomebody help figure box PLEASE!!

    What is your net volume? And if this is a typical L-port box, how can the port be 14" tall but the box 16" tall?



    Ride: 1993 Mazda MX-3
    HU: Alpine CDA-9853 with KCA-420i iPod Interface
    Front Stage: Pioneer Premier TS-D602P
    Sub Stage: TC Sounds LMS-R 15 Dual 2 in 4 cuft. box tuned to 24hz
    Front Amp: Precision Power PC2400.2. 100rms x 2 at 4 ohms
    Sub Amp: Powerbass XA 1500d. 1500rms x 1 at 1 ohm
    Refs:
    Sold to: 99StangGt, Kagymp5, DMDAKOTA, Snozzer, spljunkiems, jblanford, 98dodgestratus, stishdr, kombat96
    Bought from: allenzo, BreakMyWallet, pickup1, defj, select127

  3. #3
    sslacker's Avatar
    sslacker is offline Street Beat!!!

    Threadstarter


    Join Date
    May 2006
    Location
    In a van down by the river
    Posts
    37
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: cansomebody help figure box PLEASE!!

    Sorry port is 16" tall will fix




  4. #4
    Join Date
    Oct 2005
    Location
    Beatrice, NE
    Age
    27
    Posts
    654
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: cansomebody help figure box PLEASE!!

    That doesn't make sense either lol. If your box has an external height of 16", than the port is 14.5" tall, assuming there is no double baffles and you used 3/4" MDF.



    Ride: 1993 Mazda MX-3
    HU: Alpine CDA-9853 with KCA-420i iPod Interface
    Front Stage: Pioneer Premier TS-D602P
    Sub Stage: TC Sounds LMS-R 15 Dual 2 in 4 cuft. box tuned to 24hz
    Front Amp: Precision Power PC2400.2. 100rms x 2 at 4 ohms
    Sub Amp: Powerbass XA 1500d. 1500rms x 1 at 1 ohm
    Refs:
    Sold to: 99StangGt, Kagymp5, DMDAKOTA, Snozzer, spljunkiems, jblanford, 98dodgestratus, stishdr, kombat96
    Bought from: allenzo, BreakMyWallet, pickup1, defj, select127

  5. #5
    sslacker's Avatar
    sslacker is offline Street Beat!!!

    Threadstarter


    Join Date
    May 2006
    Location
    In a van down by the river
    Posts
    37
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: cansomebody help figure box PLEASE!!

    Quote Originally Posted by matt_martin87 View Post
    That doesn't make sense either lol. If your box has an external height of 16", than the port is 14.5" tall, assuming there is no double baffles and you used 3/4" MDF.
    Just to clear things up external measurments are as follows
    35&1/2" wide by 17&1/2" high by 23&1/2" deep!!

    Hope this clears things up




  6. #6
    sslacker's Avatar
    sslacker is offline Street Beat!!!

    Threadstarter


    Join Date
    May 2006
    Location
    In a van down by the river
    Posts
    37
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: cansomebody help figure box PLEASE!!

    help anyone????




  7. #7
    Lonewolf32's Avatar
    Lonewolf32 is offline Member



    Join Date
    Jul 2006
    Location
    Springtown, TX
    Posts
    50
    Post Thanks / Like
    Images
    12
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: cansomebody help figure box PLEASE!!

    Just going by what you gave that would be tunned at about 41 hz. I got this by saying you used a net Volume of 6 cuft
    (the internal volume - Port displacement).




Closed Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum