Pics will be up tonight.
Everytime i try to put screws in it cracks even though i predrilled the holes. Any ideas? For now though I'm sticking with wood glue
Senior VIP Member
Pics will be up tonight.
Everytime i try to put screws in it cracks even though i predrilled the holes. Any ideas? For now though I'm sticking with wood glue
e6300 FTW
what size you using?Originally Posted by lil azn 06
no pics till tonight??? you know your gonna get flamed right???????????
cmon dude, you know you have to post pics at the start
refrences:
logan_searching, Big Rea$e, rfluvinmf, Davecubs14, reaudiofan, Krazed4Bass, SR20det, jbizzle x 4, bamaboy, mazdakid, mike11202,sbcaprice305, anotherguy(yes, that is his sn), ROE, coreyanderson, gebrochen, 528hz, bassmasta (x2), ustroops52, noob24,vrwm, lafanboy, explodftl,TheLow, tommythecat,dub22, hunterw, many more.....
**** PATALPINE :: SCAMMER******
CarAudio.com Elite
is it mdf? are u predrilling both boards? is the drill bit to small for the screw?
Senior VIP Member
Ahh heres some pics then. I hate using the XTI in such dusty conditions, so the canon s230 will do for now =[
Im using 3/4 MDF, predrilled the holes with the drill bit basically the same size as the screw
Senior VIP Member
Basically the same size as the screw or the same size?
REFS-LiquidClen, IM IN HERE, saywhat?, theCybe
Senior VIP Member
it would leave the threads of the screw to be screwed on.
My life be like....
Did you use a jasper jig to cut the circles?
References:
Caraudio.com
Luckyt,Hotown,Thunder9500,Vladd,Mikeyb,kngoftheprk nglot, cd6551(x3),bolognabake,dalucifer,phrozen5100, frito,bring97, avs20,Resonant18,djman37,Showrides,Fi car audio(X2),jeeper07(x2),pimpedout97x,matrxx dude(x3),flakko(x2),mega1268,powernaudio,iamamp3pi mp.bamaboy,Daishi(x3).angrytrucker78,impalafan95.n etherland, down,blue200sx(x2),QtrHorseThecybe,jiggy2dmax,stc1 709,musclehead,NDMstang65v2,alxmlr789
Carstereos.org
Wackii,BrownNoiseBob
Explorer4x4.com
Fordexplorer157
Mp3car.com
StLB5,Coolskys05
I know there is more ill try to find them.
Senior VIP Member
Not quite i used a cutting board basically that I've seen used on there forums, ill post picturess later. Missing a lot of picturess because its been over a month project and I've been working on 3 cars at the same time.
Wood beginning to glue
Yeah in the 3rd picture the wood doesnt align perfectly, but my friend decided he didn't want to buy more wood.
Posting Permissions
 |
Bookmarks