I was wandering if I had to draw the lines on mdf boards or just give an employee sizes that I want? Sorry for noob question but I have never done it in home depot.
Banned
I was wandering if I had to draw the lines on mdf boards or just give an employee sizes that I want? Sorry for noob question but I have never done it in home depot.
Senior VIP Member
When i got mine cut at home depot i just gave them a sheet of paper with the cuts i needed and they made the cuts. Just to let you know some of the cuts i got where almost half an inch of so they wont be perfect.
dem shoes......
Panel saws arn't perfect for the best of cuts...I own oneI usually cut my boards 1/2 inch longer with it now and trim them to proper length with my table saw...another thing with the panel saw your not gonna get angle cuts for a truck style box....
Current 2010 Louisiana USACi State Records :
Trunk 0-1000.................. 151.3
StreetBeat 2................... 145.6
Stock 1801-up.................153.8
SuperStock 1801-up..........154.2
Top three in 11 out of 26 power classes and Louisiana USACi Points Leader at 465
Banned
thanks for the info, maybe somebody knows any other way/place to make good cuts, couse I am tired of my table saw.
drag it!
I go to a cabinet shop for my cuts... they have MDF in stock, and they cut with precision machines
2006 Mercedes-Benz CLS55 AMG
Supercharged V8 5.5L
Banned
thats actually a great idea, simple one too how come I have never thought of thatOriginally Posted by Kenny Pollock
I go to a cabinet shop for my cuts... they have MDF in stock, and they cut with precision machinesDO they charge u anything for cutting?
box builder extraordinair
Panel saws arn't perfect for the best of cuts...I own one
i do the same. its also hard to cut down a 4X8 sheat on a 2X6 table saw
Head installer for Hamilton Audio
Macrom, Stetsom, RD and Sundown car audio
1999 Jeep Cherokee Sport
Eclipse CD3100 head unit
Steg Audio System F4 380 4ch amp
Macrom M2 6 1/2 comp set
RE RE 10
dB set up
SD3000, SPL12 143.4dB (in my 91 Sonoma)
http://www.sounddomain.com/ride/759285
CarAudio.com Elite
Go to one of Ace Hardware's lumber stores if you have one near you. THey have areas dedicated to project cuts. The ones I got were perfect.
Dave
Not one of my cuts at home depot were to the measurements I gave them. Some were even 3/4" off. insane.
|99 tony stewart monte carlo 20| -
Flowmaster 40 Series. PCP Reverse Glow Gauges. TunerAction.com. Sony Xplod Headunit. Sony Xplod Speakers. 17" Linglong L688 Tires. Sovereign Alloy Rims. Blackouts. 7 Color LED Underbody Kit (busted). 7 Color LED Interior Glow. Two Infinity Perfect 10.1 subwoofers powered by a Kenwood KAC-9102D amp. A few decals (+25 hp).
Bullhockey
don't get it cut at lowes, home depot anywhere like that.. Those guys couldn't care less about your cuts. I used to do that before i got tools and table saw.. Now i love cutting my own stuff..
F-150 Crew Cab 4x4 Lariat in need of SQ!
Bought From:
153dbcivic, gentlejax, waggs, roscod1, tapout, pioneerpimp, sundownz, fletch, Inferno333, sxpimpin, loudwhat?
Sold To
XCaliber, billabongcr
CarAudio.com Elite
how much does it cost to get em to do all the cuts
1/2 Team SubHertz
i have never gone to a cabinet place i should do that.....
VEHICULAR-'01 Monte Carlo Ls
DECK-Alpine CDA-9855
FRONTS-Type-R 6.5" components
FRONT STAGE AMP Kicker Kx250.2
SUB AMP-Elemental Designs-eD NinE.1 @ 1 ohm
SUB-Stereo Integrity Magnum D2
Wiring-1/0 AWG www.weldingsupply.com
Electrical-2X Optima Red Tops
Box-2.0 @ 32 HZ
REFS- toolowtoogo, cadenceowner, chibahawk, fived, bibby
Term Lab Scores
RL-P 12's TL scores---142.8 db drag 138.2 in the bass race..
SCORES ABOVE AT 30 HZ!!!! (box tuning that is)
SI MAG 12 TL scores
Box tuning 32hz - 140.9 @ 46hz
My life be like....
and home depot and lowes is hit or miss. Depends on the person working really.
References:
Caraudio.com
Luckyt,Hotown,Thunder9500,Vladd,Mikeyb,kngoftheprk nglot, cd6551(x3),bolognabake,dalucifer,phrozen5100, frito,bring97, avs20,Resonant18,djman37,Showrides,Fi car audio(X2),jeeper07(x2),pimpedout97x,matrxx dude(x3),flakko(x2),mega1268,powernaudio,iamamp3pi mp.bamaboy,Daishi(x3).angrytrucker78,impalafan95.n etherland, down,blue200sx(x2),QtrHorseThecybe,jiggy2dmax,stc1 709,musclehead,NDMstang65v2,alxmlr789
Carstereos.org
Wackii,BrownNoiseBob
Explorer4x4.com
Fordexplorer157
Mp3car.com
StLB5,Coolskys05
I know there is more ill try to find them.
Bullhockey
the guy cutting the sheet for me usually told me 25c a cut but when i would go to the register to pay, they normally wouldn't charge for the cuts at all because most of the time no one at the register knew they even charged for cuts..
F-150 Crew Cab 4x4 Lariat in need of SQ!
Bought From:
153dbcivic, gentlejax, waggs, roscod1, tapout, pioneerpimp, sundownz, fletch, Inferno333, sxpimpin, loudwhat?
Sold To
XCaliber, billabongcr
OG
They give you a sheet sometimes with how many cuts they made and at what price, but the cashier never asks for it. If they ever did, I'd tell them I didn't get a price sheet.
Ride: 1993 Mazda MX-3
HU: Alpine CDA-9853 with KCA-420i iPod InterfaceFront Stage: Pioneer Premier TS-D602P
Sub Stage: TC Sounds LMS-R 15 Dual 2 in 4 cuft. box tuned to 24hz
Front Amp: Precision Power PC2400.2. 100rms x 2 at 4 ohms
Sub Amp: Powerbass XA 1500d. 1500rms x 1 at 1 ohmRefs:Sold to: 99StangGt, Kagymp5, DMDAKOTA, Snozzer, spljunkiems, jblanford, 98dodgestratus, stishdr, kombat96Bought from: allenzo, BreakMyWallet, pickup1, defj, select127
Posting Permissions
 |
Bookmarks