Closed Thread
Results 1 to 4 of 4

Reload Thread: box build help

  1. #1
    just_in's Avatar
    just_in is offline masta



    Join Date
    Jul 2006
    Location
    Okieville
    Posts
    31
    Post Thanks / Like
    Mentioned
    0 Post(s)

    box build help

    --------------------------------------------------------------------------------

    im planning on building my first ported box. and was wondering wat glue nails etc and should i but sum bracing inside
    its for 2 cvr 15s 4cubes at 32hz each chamber







  2. #2
    geowick07's Avatar
    geowick07 is offline CarAudio.com Veteran



    Join Date
    May 2006
    Location
    Warren, Michigan, United States
    Age
    34
    Posts
    2,027
    Post Thanks / Like
    Images
    7
    Mentioned
    0 Post(s)

    Re: box build help

    1) Punctuation and grammar are your friend.
    2) TiteBond 2 or 3 is very good.
    3) Drywall screws (be sure to pre-drill)
    4) Bracing - some 1" dowel front to back
    5) Seal it all up inside with clear, 100% silicone. Be sure to let it dry/ventilate for 24-48 hours before installing the driver into the enclosure.




  3. #3
    Join Date
    Oct 2005
    Location
    Beatrice, NE
    Age
    27
    Posts
    654
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: box build help

    Everything mentioned above and:

    countersink your screws
    use at least 1 5/8" screws if your building with 3/4' MDF



    Ride: 1993 Mazda MX-3
    HU: Alpine CDA-9853 with KCA-420i iPod Interface
    Front Stage: Pioneer Premier TS-D602P
    Sub Stage: TC Sounds LMS-R 15 Dual 2 in 4 cuft. box tuned to 24hz
    Front Amp: Precision Power PC2400.2. 100rms x 2 at 4 ohms
    Sub Amp: Powerbass XA 1500d. 1500rms x 1 at 1 ohm
    Refs:
    Sold to: 99StangGt, Kagymp5, DMDAKOTA, Snozzer, spljunkiems, jblanford, 98dodgestratus, stishdr, kombat96
    Bought from: allenzo, BreakMyWallet, pickup1, defj, select127

  4. #4
    lilmaniac2's Avatar
    lilmaniac2 is offline Ask Me about SI Mag V4!



    Join Date
    Jan 2006
    Location
    Somewhere, Else
    Age
    27
    Posts
    15,929
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: box build help

    Quote Originally Posted by geowick07 View Post
    1) Punctuation and grammar are your friend.
    2) TiteBond 2 or 3 is very good.
    3) Drywall screws (be sure to pre-drill)
    4) Bracing - some 1" dowel front to back
    5) Seal it all up inside with clear, 100% silicone. Be sure to let it dry/ventilate for 24-48 hours before installing the driver into the enclosure.
    What if u use black silcone? What if i use wood glue?

    Just seal it up properly with wood glue or some other good type of sealant.. the color really doesnt matter




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum