well i was thinking at school today about a new box idea and i put together a design that looked something like a man holding his arms up bent at the elbow. Anyhow, when i got home i punched some numbers and thought up a design which will either work or will be crap. It is bassically a <1cf enclosure with 2 40" long aeros coming out either side, with an elbow on each and firing up though the rear speaker holes in the rear deck . I just had some scrap 3/4 mdf laying around so i made some cuts(with a jig saw ) and glue/nailed the enclosure together. the dimensions are 13.5X13.5x10(exterior) and wehn completed should be tuned to about 32 Hz. Now onto the pics
Cuts made, also the sub being used(12" kenwood kfc-w3005)
box almost built...
installed without ports and kenwood mono amp which will give it 250ish
anyways, tommarow it will be finished and all the leaks will be filled . who knows, maybe i will throw the A2400Db at it...
discuss...im curious what you all think of the disign? and im sure im not the first to do it, but i havent ever seen this particular design done before
btw, check out the ghetto wiring lol