I recently (with the help of some coworkers at the Circuit City Roadshop) put in my first car audio system into my Ranger. The setup included Kicker KS Coaxials in all four panels powered by a ZX200.4, and two Kicker L5 8" powered by a ZX400.1. I had no clue what to look for in a system and after having this sytem i realized I wanted something a little louder. The setup I am currently trying to design includes Kicker RS Components in all four panels powered by a SX700.4 and two L7 12" powered by a SX1250.1.
I found some specs for L7 vented enclosures on Kickers website and so far they are the only designs I have to go off of. If I crunch the math is there a way to alter the dimensions of the enclosures and ports so that it's the same as the Kicker specs? I know that I want to have the enclosures ported but with the limited space I have in the rear of my cab I didn't know if it could be done. Attached are a few pictures of the back cab completely taken apart when I dynamatted the interior, as well as with it all put back together with the box in place. I plan on custom cutting the plastic interior panels to maximize my workspace as well as integrate the box into the back kind of how the current box is. Any help or ideas is greatly appreciated and thanks in advance!