1. ## Box Volume.

Can anyone figure the volume of this box?

W= 46"
D= 7 1/2"
H= 17"

Thanx

P.S.
Yo, Jmac, this is the box you cauculated for me, but i gave you the wrong dimensions. :o
:o

2. ## Re: Box Volume.

Originally posted by BigBoomer
Can anyone figure the volume of this box?

W= 46"
D= 7 1/2"
H= 17"

Thanx

P.S.
Yo, Jmac, this is the box you cauculated for me, but i gave you the wrong dimensions. :o
:o
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions

3. ## Re: Re: Box Volume.

Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions
Originally posted by evo2k3
wtf? are you retarded? thats a freaking rectangular box man! V=w*d*h ...this gives you in^3.....divid by 12^3 and you get ft^3....make sure that you use inside demensions

4. why did you do that?

5. thatd be 3.4 cubic feet

6. Originally posted by evo2k3
why did you do that?
Cuz i felt like it, Stupid!

7. Originally posted by geonn
thatd be 3.4 cubic feet
\

Thanx

8. Originally posted by geonn
thatd be 3.4 cubic feet

hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.

9. Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.
Originally posted by THE IDIOT, evo2k3
hold on a second...not to make this another flaming thread, but you asked someone else to calculate the volume of a RECTANGULAR box!! i mean come on, my 8 year old bro can do that, and i even told you exactly how to do it, so dont go calling me 'stupid' when i am not the ignorant one. thanks, my flamming is done.

10. ok go to the flaming foruum if u wanna quote some1 20 times

11. Originally posted by Jmac
Assuming 3/4" MDF with a divider ...

1.1 ft^3/chamber after speaker displacement.

Assuming no divider ...

1.12 ft^3/sub after speaker displacement

Both assuming the dimensions you gave were external ...
yes that is right i just didnt really feel like thinkin about it so i just gave him the volume with those dimensions

ok go to the flaming foruum if u wanna quote some1 20 times
Not 20...25! HA!!!!!!!!!!!:p

13. Bigboomer ur a little [email protected] and u no what i think i now no what thundertunes was like thanks for showing me u dumba\$\$ little alien ur a discrace to mankind grow up. Or wait is this thundertunes someone tell me cause his pissing me off.

## User Tag List

#### Posting Permissions

• You may not post new threads
• You may post replies
• You may post attachments
• You may edit your posts