Mountaineer Man wants a horn, Mountaineer Man gets a horn...

[Death By Bass]

well, Mr Mountaineer Man wants some horns, so, I'm designing some for him, that will house these woofers:

http://www.partsexpress.com/pe/showd...number=290-307

will post the design when I've finished...

PEACE OUT MAN!!!

[Pyro_By_Nature]

Yep, let's see what you can do on the box, I'll see what I can do on the install.

Just a note to everyone. These WILL be metered! At close to their RMS if both will fit, and then with close to 1,000rms to the two for a final frying.

[Death By Bass]

design is complete... its in metric, like I said it would be...

rear compression chamber is meant to be 7 litres, but it ended up 16, so you'll have to displace some volume in that with MDF, or bottles of water, then you can adjust the volume, to get it as loud as possible

I think there's enough room in the rear compression chamber for the 6.5inch woofers to mount...

if not... not my problem... lol

I'll post the design now hehe

[Death By Bass]

no dimensions on the diagram, at the moment, as it gets too confusing, I'll talk to you again on msn sometime, and send you a few diagrams, with different dimensions and stuff...

I was working in metric, so the numbers will be odd in imperial, but its 39.76inches wide, 25.59inches deep and 15.75inches high which are all slightly under your max dimensions, so thats good...

the horn mouth area is about 10inches X 14inches... about 7.5 times the area of the woofers cone... (thats per side by the way)

[saywhat?]

design is complete... its in metric, like I said it would be...

rear compression chamber is meant to be 7 litres, but it ended up 16, so you'll have to displace some volume in that with MDF, or bottles of water, then you can adjust the volume, to get it as loud as possible

I think there's enough room in the rear compression chamber for the 6.5inch woofers to mount...

if not... not my problem... lol

I'll post the design now hehe

You will last a long time in any business.

[iamamp3pimp]

/me waits on a freehand cut box, while macguyver smokes a cigarette, with his laser saw.


jk

Good luck on this one, it looks interesting.

[Death By Bass]

You will last a long time in any business.

it depends on the woofer, now doesn't it....

unless I have the woofer here, I can't exactly measure it, now can I?

but the design will fit a 6.5inch woofer I have here, with a few dimensions, like magnet diameter and mounting depth rounded up by a 1/3rd inch or so...

so, I dont see why the desired woofer wont fit...

[saywhat?]

Maybe im a genious or something, but I ALWAYS can find the woofer depth.

[Death By Bass]

Maybe im a genious or something, but I ALWAYS can find the woofer depth.

and the magnet diameter?

there are numbers listed on PE, but they mean nothing to me...

[Death By Bass]

[saywhat?]

if they mean nothing to you, you know nothing. all there is to it. if its 6 inches deep, its 6 inches deep NO MATTER HOW YOU LOOK AT IT.

[Death By Bass]

if they mean nothing to you, you know nothing. all there is to it. if its 6 inches deep, its 6 inches deep NO MATTER HOW YOU LOOK AT IT.

yeha, and if it says:

Dimensions: A: 6-7/8", B: 6-1/8", C: 5-7/8".

it means nothing, now does it!!! the smallest number there is 5-7/8 and I'm guessing thats the cutout, because its way to big to be the mounting depth, so, if you dont know what you're talking about, then dont say anything at all thanks.

[rollin_cc_s10]

http://www.partsexpress.com/resources/spkdims.html

[Death By Bass]

http://www.partsexpress.com/resources/spkdims.html

lol, yeeeaahh!!! that 6.5inch woofer is 6inches deep... lol, sure thing!!!

[rollin_cc_s10]

according to them it is. **** that must be one hell of a beefy woofer. seems kinda odd huh?