Closed Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 29

Reload Thread: Request: Box plans for 4 10's ported

  1. #1
    ultimate157's Avatar
    ultimate157 is offline Engineering Student



    Join Date
    Mar 2006
    Location
    Worcester, ma
    Posts
    7,246
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Request: Box plans for 4 Assasin 10's ported

    Hey guys, I've never built a ported box, and I figured it would be easier, and sound better, if someone designed the plan for me.

    What I'm going to be working with are 4 AA Assassin 10" woofers. Full t/s specs can be seen here:
    http://ascendantaudio.com/assassin10specs.html

    It says each one should be in 1.2cube. I'd like the tuning to be low, because this is a daily driver. Probably the recommended 32hz.

    Vehicle: Jeep Cherokee (Space isnt really an issue )
    Dimensions I have to work with are as follows: 42" wide, 24" deep, and 20" tall.

    Double top baffle. Subs on top, port on top. Probably put the port in the center, somethin like this:

    O || O
    O || O

    Thanks,
    Matt F
    Last edited by ultimate157; 09-21-2006 at 11:22 PM.



    '98 Jeep Grand Cherokee
    Source: Pioneer 880 PRS *Active
    Tweeters: 1" CDT TW-25
    Midrange: 6.5" CDT CL-65
    Sub: 15" SSA Icon
    Box: 4.0 @ 32hz
    Amp: Soundstream Tarantula 2kW

    Feedback thread




  2. #2
    Phreaker's Avatar
    Phreaker is offline Senior VIP Member



    Join Date
    May 2006
    Location
    Tampa,fl
    Posts
    401
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Request: Box plans for 4 10's ported

    5ft^3 at 32Hz or a tad bigger.....


    Here is a little plan I just drew up with paint...





    My System So Far

    HU = Sony CDX-M630

    Front Stage = Stock 3.5"

    Rear Stage = None

    Subs = 2 Alpine Type R's

    Sub Amp = Power Acoustik A2400DB wired to 1 ohm

    Sub Box = 4ft^ ported at 35Hz
    1991 Dodge Stealth with stock 90amp alt. and no Big 3.
    Gets twice as loud as the olds cutlass cierra!

  3. #3
    ultimate157's Avatar
    ultimate157 is offline Engineering Student

    Threadstarter


    Join Date
    Mar 2006
    Location
    Worcester, ma
    Posts
    7,246
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Request: Box plans for 4 10's ported

    Quote Originally Posted by Phreaker View Post
    5ft^3 at 32Hz or a tad bigger.....


    Here is a little plan I just drew up with paint...


    Imageshack FTL. Won't load for me. Try photobucket. <3 them



    '98 Jeep Grand Cherokee
    Source: Pioneer 880 PRS *Active
    Tweeters: 1" CDT TW-25
    Midrange: 6.5" CDT CL-65
    Sub: 15" SSA Icon
    Box: 4.0 @ 32hz
    Amp: Soundstream Tarantula 2kW

    Feedback thread

  4. #4
    Phreaker's Avatar
    Phreaker is offline Senior VIP Member



    Join Date
    May 2006
    Location
    Tampa,fl
    Posts
    401
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Request: Box plans for 4 10's ported

    takes along time but basically

    the box is....

    Subs firing up port firing back at the hatch.

    external measurements are 24.75" wide by 24.75" deep by 1' and 2/16th" tall.

    Port is 21" long and 4" wide and the port wall is 20.25" long

    Try this thumbnail



    My System So Far

    HU = Sony CDX-M630

    Front Stage = Stock 3.5"

    Rear Stage = None

    Subs = 2 Alpine Type R's

    Sub Amp = Power Acoustik A2400DB wired to 1 ohm

    Sub Box = 4ft^ ported at 35Hz
    1991 Dodge Stealth with stock 90amp alt. and no Big 3.
    Gets twice as loud as the olds cutlass cierra!

  5. #5
    ultimate157's Avatar
    ultimate157 is offline Engineering Student

    Threadstarter


    Join Date
    Mar 2006
    Location
    Worcester, ma
    Posts
    7,246
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Request: Box plans for 4 10's ported

    That would come out to be only 3 cube though, minus port volume?



    '98 Jeep Grand Cherokee
    Source: Pioneer 880 PRS *Active
    Tweeters: 1" CDT TW-25
    Midrange: 6.5" CDT CL-65
    Sub: 15" SSA Icon
    Box: 4.0 @ 32hz
    Amp: Soundstream Tarantula 2kW

    Feedback thread

  6. #6
    Phreaker's Avatar
    Phreaker is offline Senior VIP Member



    Join Date
    May 2006
    Location
    Tampa,fl
    Posts
    401
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Request: Box plans for 4 10's ported

    ooops...

    internal measurements should be 25" wide x 24" deep x 18" tall after port displacement = 6.25ft^3 internal after port displacement.

    External measurements should be 26.5" x 25.5" x 23.5"

    can you work with an extra 3.5" in height?



    My System So Far

    HU = Sony CDX-M630

    Front Stage = Stock 3.5"

    Rear Stage = None

    Subs = 2 Alpine Type R's

    Sub Amp = Power Acoustik A2400DB wired to 1 ohm

    Sub Box = 4ft^ ported at 35Hz
    1991 Dodge Stealth with stock 90amp alt. and no Big 3.
    Gets twice as loud as the olds cutlass cierra!

  7. #7
    phantom240's Avatar
    phantom240 is offline ALL YOUR INTERNETZ



    Join Date
    Aug 2005
    Location
    Southeast Louisiana
    Age
    26
    Posts
    5,710
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Request: Box plans for 4 10's ported

    Wide short ports FTL.
    I might be able to draw soemthing up for ya, but what kind of area do we have to work with in here?



    Quote Originally Posted by 18lexusowner View Post
    If your not a liberal cockbag than it's funny.
    Refs: Lostsoul, DaGh0st, Jadeaudio, mhschiefs806, revrider1, GavinVoy, maximpakt

  8. #8
    ultimate157's Avatar
    ultimate157 is offline Engineering Student

    Threadstarter


    Join Date
    Mar 2006
    Location
    Worcester, ma
    Posts
    7,246
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Request: Box plans for 4 10's ported

    Quote Originally Posted by phantom240 View Post
    Wide short ports FTL.
    I might be able to draw soemthing up for ya, but what kind of area do we have to work with in here?
    Looking at 42" wide, 24" deep, and 20" tall. 20" tall is just to the top of my rear seat. I would like to keep it under 20" tall because it'll start to interfere with my rear-view mirror. The footprint of 42x24 should be plenty to work with to keep it under 20" tall i should imagine...



    '98 Jeep Grand Cherokee
    Source: Pioneer 880 PRS *Active
    Tweeters: 1" CDT TW-25
    Midrange: 6.5" CDT CL-65
    Sub: 15" SSA Icon
    Box: 4.0 @ 32hz
    Amp: Soundstream Tarantula 2kW

    Feedback thread

  9. #9
    Phreaker's Avatar
    Phreaker is offline Senior VIP Member



    Join Date
    May 2006
    Location
    Tampa,fl
    Posts
    401
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Request: Box plans for 4 10's ported

    yeah.....you're going to end up with a way bigger box then you need if you use the 42" x 24" and you're going to need the port on the front wall at the bottom seeing as the size of the box and the subs you'll be using...

    A 10" sub actually measures 10"-11" across from outside of one side to outside of other side so 4 10"s will need to take up a legth of anywhere from 40" to 44"

    Try the box I designed...I guarantee you won't be dissapointed.

    Make a few mods to it to make it 3.5" shorter so it doesn't come above the back seats...

    But,it won't be that big a difference...3.5" over the backseat compared to someones head blocking the rearview mirror.



    My System So Far

    HU = Sony CDX-M630

    Front Stage = Stock 3.5"

    Rear Stage = None

    Subs = 2 Alpine Type R's

    Sub Amp = Power Acoustik A2400DB wired to 1 ohm

    Sub Box = 4ft^ ported at 35Hz
    1991 Dodge Stealth with stock 90amp alt. and no Big 3.
    Gets twice as loud as the olds cutlass cierra!

  10. #10
    vetkilr's Avatar
    vetkilr is offline CarAudio.com Veteran



    Join Date
    Mar 2006
    Location
    brandon,fl
    Posts
    3,329
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: Request: Box plans for 4 10's ported

    pm iamamp3pimp.............



    refs:Flakko,saywhat,mmata13(sold 1605D amp),nVRuckus(bought fuse blocks), dkguitarist(traded 2 amps),MikeyB(sold MD2),CBFryman2(sold MD2),gundecker (bought 20.1),Sakura (2 Trades),killahbean (bought DMX12),Loud3(Bought Fiberglass Kicks),tb2007(sold diamond amp),iamamp3pimp(bought box's 3 so far /sold 20.1/sold 2 L7s,ZX650.4),chillcat34433(bought 12"RF HX2), ultimate157(sold opti 2000D),bballrrt06(sold opti 2000D),GrnEydDvl(sold kx2500.1),BassAddictJ (sold kx2500.1),pwuthedon(bought Lanzar 4000D)

    lostsoul (5.25 mtx comps) Bad once I hooked them up.....................

  11. #11
    ultimate157's Avatar
    ultimate157 is offline Engineering Student

    Threadstarter


    Join Date
    Mar 2006
    Location
    Worcester, ma
    Posts
    7,246
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Request: Box plans for 4 10's ported

    Quote Originally Posted by vetkilr View Post
    pm iamamp3pimp.............
    Already did, got a sick *** box print from him.



    '98 Jeep Grand Cherokee
    Source: Pioneer 880 PRS *Active
    Tweeters: 1" CDT TW-25
    Midrange: 6.5" CDT CL-65
    Sub: 15" SSA Icon
    Box: 4.0 @ 32hz
    Amp: Soundstream Tarantula 2kW

    Feedback thread

  12. #12
    vetkilr's Avatar
    vetkilr is offline CarAudio.com Veteran



    Join Date
    Mar 2006
    Location
    brandon,fl
    Posts
    3,329
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: Request: Box plans for 4 10's ported

    Quote Originally Posted by ultimate157 View Post
    Already did, got a sick *** box print from him.
    I was wonderin if it was you that he was doin...........sweet.

    4 10ssssssssss

    sweet



    refs:Flakko,saywhat,mmata13(sold 1605D amp),nVRuckus(bought fuse blocks), dkguitarist(traded 2 amps),MikeyB(sold MD2),CBFryman2(sold MD2),gundecker (bought 20.1),Sakura (2 Trades),killahbean (bought DMX12),Loud3(Bought Fiberglass Kicks),tb2007(sold diamond amp),iamamp3pimp(bought box's 3 so far /sold 20.1/sold 2 L7s,ZX650.4),chillcat34433(bought 12"RF HX2), ultimate157(sold opti 2000D),bballrrt06(sold opti 2000D),GrnEydDvl(sold kx2500.1),BassAddictJ (sold kx2500.1),pwuthedon(bought Lanzar 4000D)

    lostsoul (5.25 mtx comps) Bad once I hooked them up.....................

  13. #13
    ultimate157's Avatar
    ultimate157 is offline Engineering Student

    Threadstarter


    Join Date
    Mar 2006
    Location
    Worcester, ma
    Posts
    7,246
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Request: Box plans for 4 10's ported

    Quote Originally Posted by vetkilr View Post
    I was wonderin if it was you that he was doin...........sweet.

    4 10ssssssssss

    sweet
    Its about time i put that lanzar to work. Run her at 1 ohms.



    '98 Jeep Grand Cherokee
    Source: Pioneer 880 PRS *Active
    Tweeters: 1" CDT TW-25
    Midrange: 6.5" CDT CL-65
    Sub: 15" SSA Icon
    Box: 4.0 @ 32hz
    Amp: Soundstream Tarantula 2kW

    Feedback thread

  14. #14
    Snozzer's Avatar
    Snozzer is offline Member



    Join Date
    Jul 2006
    Location
    Michigan
    Posts
    91
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Request: Box plans for 4 10's ported

    Since im kinda in the same area i figure i wont need to make a new thread. Im getting 4 8" assassins. Can someone modify one of the boxes to fit 4 8"s? Was looking for around 2.4ft^3 and 35 Hz.



    1995 Ford Taurus...... Dead R.I.P.

    1993 Explorer
    HU - Pioneer DEH-4600MP
    Sub - 15" XXX '05 4^3 cuft at 28 hz
    Amp - Clif Design 1500 rms @ 1 ohm
    Front Doors - cheap pioneer
    Rear Doors - " "

    Refs: the_franchise, matt_martin87, TheDeAdCometh

  15. #15
    ultimate157's Avatar
    ultimate157 is offline Engineering Student

    Threadstarter


    Join Date
    Mar 2006
    Location
    Worcester, ma
    Posts
    7,246
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Request: Box plans for 4 10's ported

    Quote Originally Posted by Snozzer View Post
    Since im kinda in the same area i figure i wont need to make a new thread. Im getting 4 8" assassins. Can someone modify one of the boxes to fit 4 8"s? Was looking for around 2.4ft^3 and 35 Hz.
    We need dimensions to work with here.



    '98 Jeep Grand Cherokee
    Source: Pioneer 880 PRS *Active
    Tweeters: 1" CDT TW-25
    Midrange: 6.5" CDT CL-65
    Sub: 15" SSA Icon
    Box: 4.0 @ 32hz
    Amp: Soundstream Tarantula 2kW

    Feedback thread

Closed Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum