If I make a wedge enclosure, and it's 23 high, 20 deep, and 23 wide... How long will the face be, and what angle will I have to make the top and bottom edges?
Senior VIP Member
If I make a wedge enclosure, and it's 23 high, 20 deep, and 23 wide... How long will the face be, and what angle will I have to make the top and bottom edges?
Refs: fasfocus00, loudcartunez, MasterOfAllBass, RyanM923, TerryRacing86, RawDogJ, FocalCirrus, DeadlyCloud, StratusRuiz
the salty ca.com mod
cut the side pics to the angle you want. then measure from the top to the bottom. ha
CarAudio.com Veteran
or learn some trig
and what you have described seems to be a rectangular box, i think you forgt one measurement.
village idiot/racist
hahah yaOriginally Posted by xluben
or learn some trig
and what you have described seems to be a rectangular box, i think you forgt one measurement.
I must follow in eugenics' footsteps, for he is great
Ref's: Ebay
VOA_NIGHTMARE, Blados, frankga2, allenzo, bamaboy x2, Crown_amps, violentrapture, adio x3, bumpin_blazer, fi car audio, haunther, sbcaprice305 x2
Posting Permissions
 |
Bookmarks