Closed Thread
Results 1 to 7 of 7

Reload Thread: A little help with ports

  1. #1
    remltr's Avatar
    remltr is offline Junior Member



    Join Date
    May 2006
    Location
    ny,ny
    Posts
    12
    Post Thanks / Like
    Mentioned
    0 Post(s)

    A little help with ports

    OK,here it goes.
    A 1.27^3 gross internal volume box with 1-10" type r. Fb 36 Hz.
    A port with a diameter of 2" and 5" long will give me 36Hz?
    Using the carstereo link it told me that I need a minimum diameter of 5.79" and it would be 50.52" long? Is it as simple as putting a port that is 2" in diameter and 5" long and the box will be tuned to 36Hz? I'm going by what Alpine reccomends:
    1.3ft^3 Gross internal volume
    Fb 36 Hz.
    Wish I had more room but this is an Audio Enhacers enclosure for a camaro.
    Thanks for your help guys!







  2. #2
    remltr's Avatar
    remltr is offline Junior Member

    Threadstarter


    Join Date
    May 2006
    Location
    ny,ny
    Posts
    12
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: A little help with ports

    Anyone?




  3. #3
    Trixter's Avatar
    Trixter is offline Keepin it Simple



    Join Date
    Apr 2002
    Location
    Kenosha, WI
    Age
    36
    Posts
    2,608
    Post Thanks / Like
    Images
    29
    Mentioned
    0 Post(s)

    Re: A little help with ports

    i would step it up to a 4" port. also i would recommend a precision / areo port.



    2006 Jeep Liberty
    Adire Audio, Cadence, Clarion, MB Quart

    Lv = [(14630000 x R^2) / (Fb^2 x Vb)] - 1.463R
    *Vb = vol. in cu"
    **R = sq.rt. A / Pi (for square/slot port)

  4. #4
    remltr's Avatar
    remltr is offline Junior Member

    Threadstarter


    Join Date
    May 2006
    Location
    ny,ny
    Posts
    12
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: A little help with ports

    so If I use their port calculator. I just drill a hole and install?




  5. #5
    Trixter's Avatar
    Trixter is offline Keepin it Simple



    Join Date
    Apr 2002
    Location
    Kenosha, WI
    Age
    36
    Posts
    2,608
    Post Thanks / Like
    Images
    29
    Mentioned
    0 Post(s)

    Re: A little help with ports

    yep



    2006 Jeep Liberty
    Adire Audio, Cadence, Clarion, MB Quart

    Lv = [(14630000 x R^2) / (Fb^2 x Vb)] - 1.463R
    *Vb = vol. in cu"
    **R = sq.rt. A / Pi (for square/slot port)

  6. #6
    ruger's Avatar
    ruger is offline CarAudio.com Elite



    Join Date
    Apr 2006
    Location
    USA
    Posts
    571
    Post Thanks / Like
    Images
    11
    Mentioned
    0 Post(s)

    Re: A little help with ports




    alpine cda-9813
    kinetik hc 600
    mtx thunder 240
    tc-oem 10" .5cu sealed

  7. #7
    remltr's Avatar
    remltr is offline Junior Member

    Threadstarter


    Join Date
    May 2006
    Location
    ny,ny
    Posts
    12
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: A little help with ports

    you guys RULE! Thanks for the info!




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum