Hey guys here's a build up thus far of my box that will host 2 10'' JL w3v3's. I built the box to JL spec. The box was simple to build, the faceplate is a different story. The faceplate required back and forth testing and cutting . I'm happy with the result thus far. I sold my 10'' w6 for these 2 new w3v3's that will be coming in the mail. They will be powered by a 500/1. Everything has gone fine with the box except when I attach the faceplate to the box. I am not able to get the structure to sit properly in the trunk. So unfortunately I will have to carpet the box inside my trunk because I need to screw the faceplate into the box while its in the trunk (put the box and faceplate in separately) and then put the carpet over the screws and all The only thing I am not completely happy about is the comestic look of the 9'' cutout's, Although they are 9'' all around. Anyhow the speaker will cover all that up and it will look clean. Also I didn't think about how low the speakers would sit, but I guess its fine. I'm going to fill the box with poly-fill. Is this a good idea? Also how do I wire together my speakers so that I can have them coming out of one terminal out the back. The speakers should be a here in a few days. Stayed tuned. And please leave your input.
Well, this would will be my 5th box in one year going into my trunk.
1st Box (Didn't build)
2nd Boxes (Built)
3rd Box (Built)
4th Box (Didn't Build)