Closed Thread
Results 1 to 4 of 4

Reload Thread: Fat Joints in the AM

  1. #1
    heyman421's Avatar
    heyman421 is offline Veteran Camel Master



    Join Date
    Jan 2006
    Location
    Akron, OH
    Posts
    4,170
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Fat Joints in the AM

    Wondering what kinds of joints some of you have tried using in your enclosures, and what was easiest/ strongest/ prettiest....

    I decided i'm building my own box, since NONE of the shops i've had build me a box have done a very good job, and my #1 fear is upholstery, so i'm going to build using a finishing wood (walnut or birch) and stain and wax it....

    Since i'll be able to see the wood, tho, i'd like to use some nice looking joints on the box, tho......

    My first idea was tongue and groove, but tongue and groove joints are really intended to replace butt-joints, and not corners, and you're really not supposed to glue tongue and groove joints......

    I guess my 3 choices are mitre-joints, tongue and groove, or dovetails... I think dovetails require a jig as well as the bit, which is pretty expensive if i recall correctly, and althogh mitres have more surface area than just gluing the pieces together, i don't know how they stand up to internal pressure.....

    What do you recommend?







  2. #2
    heyman421's Avatar
    heyman421 is offline Veteran Camel Master

    Threadstarter


    Join Date
    Jan 2006
    Location
    Akron, OH
    Posts
    4,170
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Fat Joints in the AM

    and does anyone know how to factor in extra length for a tongue and groove joint?

    Do i just add 1/4" to each direction that will have a tongue at the end, and set my fence @ 1/4"?




  3. #3
    PV Audio's Avatar
    PV Audio is offline The Vision of Sound



    Join Date
    Apr 2004
    Location
    Indy
    Age
    25
    Posts
    19,655
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Fat Joints in the AM

    Dovetail is probably the prettiest. Beyond your simple butt/lap joint, I've done dados, Tn'G and chamfer/miter joints. TNG is probably the strongest, but as I said, dovetail looks the best. On speakerboxes though, dovetail is worthless unless you're using a **** enclosure.




  4. #4
    heyman421's Avatar
    heyman421 is offline Veteran Camel Master

    Threadstarter


    Join Date
    Jan 2006
    Location
    Akron, OH
    Posts
    4,170
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Fat Joints in the AM

    ya, i just don't know if i have the nerve to learn to dovetail on $50+ per sheet finishing wood.... And i'm sure i could do it with a jig, but that's a big investment for a box here and there....

    I definitely plan on dado'ing the port piece, but still not sure what i'll do for the rest...

    Either a mitre joint around the perimeter (looks good, pretty simple) or i'll do tongue and grooves, and use a rounder bit around the edges..... I think those are my two most realistic options, only thing i'll need to buy/build is a table for my router, and a tongue and groove bit ($40)

    You think that would look alright?




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum