Backseat Of 94 Caprice Classic...

[HardHittaz00]

I want to build a box coming through the trunk into the backseat, and have my subs where the back of the backseat would be... But I can't get the **** thing off... Does anyone here know how? So maybe I can start with my new enclosure...

[NhustlaR]

dang, i was hoping for a good story

[NhustlaR]

oh, cut it... or look for bolts

[Speedyd718]

oh, cut it... or look for bolts

yeah b-body backseats don't fold down. you have to unbolt it. check out www.impalassforum.com you might find some info searching there

[MikeyB]

Try pushing the bottom of the backseat back, theres probably hooks under it, just push back and pull it up. Then if you get the bottom off you'll probably see the bolts for the back piece.

[Towncar]

Taking out rear seats is very simple. Your seats are probably similar to my towncar. Try pulling at the bottum seat, as they are probably held on by some latches. Then just start taking the bolts loose

[HardHittaz00]

See... The bottom seat is cake to take out... Just push and the hooks come loose... But the backrest part, everyone says, "just unbolt it"... HOW!?! I ruined my most powerful drill today trying to break the **** bolts loose... Smoke came bezeling out of it... I tried the giant torque wrecnh... Didn't budge... How do you guys get it out so **** easy without cutting things?

[MikeyB]

I used a 3/8 drive socket wrench with a 1/2inch socket!



If you cant get em out I would just drill them out

[HardHittaz00]

What do you mean by drill them out?

[xluben]

drill a hole through the screw, pretty much destroying the screw, just leaving the original hole.

[404]

you tried to get something out with a torque wrench that a drill couldnt get out? lol.. that thing is prob broke

[Towncar]

I just used a wrench. It took forever though, because the bolt was old and rusted