alright, im building my sub box within the next few days and would like to make sure i made all the appropriate changes to make it work. It is for an atomic AP12.
This is the origional plan i started with, from RE's website...which is 2.5@35hz
Now, this is the chopped and screwed version. i had to lower it and add make it wider so it will fit it my trunk. i beleive i did the calculations correct and there should be equally as much port area and box volume as the origional.
I also made the port 3" wide all the way along, as RE appears to have not....unless my eyes are deceiving me
could someone double check these numbers for me and make sure its actually 2.5@35, and not 2.3@38 or something haha need any more pics or whatever let me know
thanks in advance