Closed Thread
Results 1 to 3 of 3

Reload Thread: New Ported Box

  1. #1
    xluben's Avatar
    xluben is offline CarAudio.com Veteran



    Join Date
    Jun 2006
    Location
    Minneapolis, MN
    Posts
    2,129
    Post Thanks / Like
    Mentioned
    0 Post(s)

    New Ported Box

    Right now I have two, 12" Assassin's in 1.25 ft^3 each, sealed. They're getting 500W @ 2 ohms (combined), and I'd like them to be a bit louder, but I still want to have a usable trunk. I have been trying to design a box that will be easy to build and make the Assassin's louder, but not take up too much space. This is what I've come up with:

    32"W x 15"H x 17"D
    2, 4" dia x 16" long flared ports
    3.30 ft^3 net (after port and driver displacement)
    tuning ends up being 32.46Hz

    WinISD shows this getting about 3.3dB louder and 5Hz lower f3.

    Is this an appreciable difference?
    Will it be worth my time?
    Am I sacrificing too much by putting them in only 3.3 ft^3 (4.0 ft^3 @ 32Hz is recommended by Ascendant)?
    Is there any reason not to put the ports on the side?

    I really don't want to take up any more trunk space, but if this isn't going to be worth my time, I could reconsider. Another concern is the ports on the side. I could probably fit them on the front baffle, but then I'd have to use 90 degree elbows to fit the necesary length inside the box.

    So, what does everyone think? Will this blow away my old setup?







  2. #2
    xluben's Avatar
    xluben is offline CarAudio.com Veteran

    Threadstarter


    Join Date
    Jun 2006
    Location
    Minneapolis, MN
    Posts
    2,129
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: New Ported Box

    anybody?

    is this a decent design?

    i know i'm sacrificing by making the box small, but i'd like to keep some trunk space. i just want to make sure this will out-pound my current setup.




  3. #3
    xluben's Avatar
    xluben is offline CarAudio.com Veteran

    Threadstarter


    Join Date
    Jun 2006
    Location
    Minneapolis, MN
    Posts
    2,129
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: New Ported Box

    Should I just go with a Moe Lester box:



    It seems good for my trunk, but is a lot deeper than what I came up with using aero ports. It seems like it would be cheaper and easier to do, and would get rid of the chance of me having done a calculation wrong.




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum