problems.

[k4rts]

my box builder built me a box. go to put it in, and its too tall. so we shove it in. ive taken it in and out of my car 2-3 times now, and everytime i take the box in or out, the surround gets all scuffed. i need to take my box out tomorrow, because i have some bigger speaker wire coming. i was wondering if theres any ideas on how i should take my box out without the sub scraping. i had the idea of dis-assembling my box and what not, but i dont think its going to work. we also thought of cutting a hole around the sub, letting the sub drop to the bottom of the box, and then take the box out, but we cant do that because of limited space.

[iceteebone]

take the screws out of the sub and remove the sub

[Kickerkitty]

so put something tough and thin on top of the speaker... is this really hard for you?

[k4rts]

take the screws out of the sub and remove the sub

if we pull the box all the way foward, we cant reach a few screws.

[k4rts]

so put something tough and thin on top of the speaker... is this really hard for you?

that was another thought of mine that i hadnt put into action yet. i just want as many ideas before i try this

[k4rts]

bump

[Ingleside]

so put something tough and thin on top of the speaker

yup

there's no two ways around it unless you can rotate the box somehow and then take the speker out.

[yne721]

if we pull the box all the way foward, we cant reach a few screws.

go spend 4 dollars on an s shaped or 90 degree screwdriver, then you can use it like an allen wrench instead of having a huge handle?