Need a box plan
I need a box design for two Memphis PR15's, here are some numbers I have:
Space between trunk base and bottom of 6X9's: 16.5"
Space between wheelwells: 36.5"
I realize it's going to be a tight fit, but it can be done.
Here are some numbers from Memphis' site:
Airspace recommendation: 7 cubic feet
Tuned to: 36 Hz
Port Dimensions: 14.5 High X 4 Wide X 15 Deep
Link to where I got the numbers from: http://memphiscaraudio.com/LiveImag...ocumentURL1.pdf
(Look under PR154)
Some sub specs: http://memphiscaraudio.com/LiveImag...ocumentURL1.pdf
(Look under 15-PR154)
Box will also be made out of 3/4" MDF and will be in the trunk of a 96 Cavalier.
I would whip up some box plans but I have no clue how to tune boxes and such... I can build them, mind you.
Thanks to anyone who gives it a shot.
Re: Need a box plan
I whipped up a couple designs myself, both are at just over 7 cubes, maybe 7.001 or something, but I am having problems with the port and what it will be tuned at.
Will be built out of 3/4" MDF.