Well I went to HD to get my cuts for Moe Lesters 4ft^3 tuned to 35Hz box and this whole time I never once friggin stopped and said to myself the obvious.
12" subwoofers and the speaker baffle is only 12.5" hmmmmmmmm.....
Doh....so here I am with the cuts for a beautiful 4ft^3 at 35Hz box but can fit onlu 10's....no 12's
I see it as I have two options right now in front of me...actualy three
Option 1: Mount the subwoofers on the top board and fire them up into the cabin from my trunk.
Option 2:Build the **** thing,my G/f wants a small system so we can get her some 10's and I'll give her my 300w amp and she said she wants a pink box
Option 3: Go back to HD or another one so I don't embarass my self even more,and buy a few 3/4" thick 2' x 4' panels of MDF and have them cut me two sides and the speaker baffle and port wall and back of the box at about 15" tall so I will end up with a mutant of the 4ft^3 at 35Hz it would be 4.95ft^3 at 35Hz after sub displacements.
All I would need to do is get a new back piece and two new sides and a new speaker baffle board.All would be cut the origianla lengths but will be cut at 15" high rather than 12.5" high.
Here's Moe Lesters original 4ft^3 at 35 Hz box plan:
And here is my mutation of it:
So what do you think?I am thinking option # 3 as it will only cost me the money for three panels of 3/4" 2' x 4' MDF.