Okay, so I finally got rid of my car (eBay) and I ended up with a 1995 Jeep Cherokee 2dr .
If some of you dont know by now, JordanTyler messed up on the last enclosure she was supposed to make, and she was putting up quite a fight for my refund, so I decided to give her another shot with a new design (very simple design as well.)
I am going for a round port, I plan to use 10" PVC piping (all Jordan has to do is cut the hole ). With a single 10" port, it would need to be 24" long for my tuning selection.
I had planned to do sub firing up and port firing back, but with a 24" long round port I do not have enough depth (I assume I need at least 4" or clearence between the end of that port and the back wall, correct me on this please.)
So I was curious what people's experiences have been in SUV's with the port firing to the side, which would be my only other option... Or what else could I do? I am set on this 10" port, so dont suggest something other
And I CAN fit it firing back, but since my back seat slants a bit, the enclosure would only be able to be around 14" tall and then I would have to increase the width quite a bit, which I would like to keep it down to allow for room for a Yellow Top back there.