aero ports

[xchaosx]

do they work ok it would be alot easier to use them in my new set up i was thinking 1 4'' per 2 12's 4 12's total in 2 seperate boxes

[img=http://img475.imageshack.us/img475/2055/newbitmapimage9oy.th.png]


box to explain a little

[InhumanAcura]

I wouldnt use a single 4" per 2 12"s for listening...try to use 1 port per sub..

[Mynameismcgyver]

Im using two 6 inch ports for a single 15.....I dont think one 4 inch for two 12's is enough.

[tommyk90]

One 6" per 12" would be the lowest i'd go (or two 4" per sub)

[tRiGgEr]

I plan on using two 4" ports for a 10. So... no.

[MrSector9]

I have a single non flared 4" with a 12" and it makes alot of noise.

I would go with 6" flared for each box

[Lakota]

One 4" = approx. 12.56 in^2 of port area.

[TypeRBass]

One 6" per 12" would be the lowest i'd go (or two 4" per sub)

[Negrolicious]

2 per minimum 4 per is more like it

[InhumanAcura]

2 per minimum 4 per is more like it

he should be more than fine with 1 4" per 12...2 is almost over kill imo..

[xchaosx]

thanks guys i'll give 4 4'' a try

[Negrolicious]

he should be more than fine with 1 4" per 12...2 is almost over kill imo..

depending on the subs, some subs need 35-40 sqin of port area like SX and DP

[tommyk90]

he should be more than fine with 1 4" per 12...2 is almost over kill imo..

Relatively speaking, one 4" port isn't much port area at all.

For a daily driver box, the minimum i would use for a basic 10" sub box (type-r, CVR, etc.) would be 20 sq. in. (or two 4" ports).

Not to say that one 4" wouldn't work, but i would think there would be some port noise and you wouldn't be extracting the full potential out of the sub.

My daily driver box is 1.5 cubes with 12 sq. in. of port, and i get shuffling from the port like no other.

[InhumanAcura]

depending on the subs, some subs need 35-40 sqin of port area like SX and DP

do you think 4 mt 15"s would need more than 7^3's and 50^2's of port?

ive never messed with these things, seriously...

[InhumanAcura]

Relatively speaking, one 4" port isn't much port area at all.

For a daily driver box, the minimum i would use for a basic 10" sub box (type-r, CVR, etc.) would be 20 sq. in. (or two 4" ports).

Not to say that one 4" wouldn't work, but i would think there would be some port noise and you wouldn't be extracting the full potential out of the sub.

My daily driver box is 1.5 cubes with 12 sq. in. of port, and i get shuffling from the port like no other.

wow, you get a star...