box for W7 in a reg. cab truck

[carguy6702]

any ideas for a box for a W7 i want t box like this
anyone have any ideas or specs for the box http://mobile.jlaudio.com/gallery/de...vehicle_id=769

[rocky 59]

if you dont go inverted you wont fit anything but a down fired eight in a reg cab. unless you don't want seat room for you to drive safely. but you may be able to fit one eight inverted in between the buckets.

[Johnny Drama]

This has to be my fav w7 setup to date. I am waiting on the guy to show up to one of our shows so I can hear it. I have started a similar project for my mag or xxx

[rocky 59]

i loooooooooooooovvvvvvvvveeeeeee that console.

[Dozy_production]

x2 thats probably the way to go. Where is the link to his work log..

[maldecido33]

thats the EXACT project i'm working on right now. i talked to the guy about it some. i'm going with a 12w7 in my single cab, with dual 4" ports. 2.5 cu ft tuned to 35hz. console is almost exactly the same as that one.

i've been sick lately, but i'm slowly working on it.

just finished all the wood work/port/fg, and im bondo-ing it now. still have quite a bit of work, though.

haven't taken too many pictures, but i do have some rough ones somewhere

[amartin_72]

WOW I once had a W7 in my regular cab ford ranger. I had bought it with a 500/1 amp for i sh*t you not 200$ total. Pretty sure it was stoeln bought it at school from a troublemaking kid. Anyways i made my box 1.3 ft sealed and since i was a noob i thought that w7s were just way over rated so i sold it for 430$ on ebay and sold the 500/1 locally for 250$ god **** i wish i would have kept that setup. Its better than my current setup by far. IF i only new how to build a box decent back then.

[maldecido33]

where the hell'd you fit it?