how much would it cost me for the wood and for lowes to make all the cuts for me?
30 bucks or so?
how much would it cost me for the wood and for lowes to make all the cuts for me?
30 bucks or so?
References:
Ali1, michaellane, cadillac114, chasinSKURT, DaRevrin, rhuff80, sam yung, The215, tukn18s, Xenophontos,nuboot,jfitz97,LuckyDerDer 2x
i think you get 3 free cuts, then its 25 cents a cut.
something like that
I've had them cut pieces before when I couldn't haul the sheet home.1st off, I never paid for any of the cuts, second the cuts ****** horribly.
Save yourself the headache and find someone with proper tools and knowledge to do it for you or borrow the tools.
At homedepot i think the first 2 or 3 were free then 10 cents each after that. 10 cents each I got what I paid for. The guy was an idiot and messed up about 2 cuts by inches and had to give me a free board. Then when I got home pieces that should have been even were off by about 1/2 an inch. I took it back and complained. Got another free board and cut it myself.
I've only had my local lowes do some cuts once cuz it was cold as ****. They were fine. With the thing they were using, I can't believe they could fok it up. Dunno what the saw is called, but it was pimp. Just be nice to them and dont rush them...they aren't getting paid **** and prolly arent in a big hurry.
REFS:JimJ, DBfan187, jimj, ology audio, excelerater, private pastry, kenny pollock, priosonnumber6, johnnyber, mattmmcs, vosschs, lax916, davidfre21, iceteebone, cd6551, vladd and others that I cant remember off the top of my head
Originally Posted by snb778
Originally Posted by RumbleNTheTrunk
I usually cut it myself, but it depends on the employees there. They didnt charge me for cuts either.
Get a girl, preferably attrative to do it.
They should be free for every cut![]()
well it's winter and freezing here, so i would like the pieces cut for me... so all that i need is assembly![]()
References:
Ali1, michaellane, cadillac114, chasinSKURT, DaRevrin, rhuff80, sam yung, The215, tukn18s, Xenophontos,nuboot,jfitz97,LuckyDerDer 2x
Home depot cut my friend's wood for free. I personally wouldn't let them cut the wood for me. Knowing how hard headed people around here can be some times I would probably get screwed over. Plus I have the space to take it home and the tools to cut it with.![]()
It's not Lowes job to build your box for you. Buy a sheet and cut the **** yourself.
HU - Alpine CDA-9835
FRONT STAGE - Diamond Audio D661
FRONT STAGE AMP - Profile 400sx
SUB AMP - Hifonics TX1505D
SUBS - 2 2003 Kicker Comp VRs
WIRING - KnuKonceptz.com
SATELLITE RADIO - Sirius
for your info, i do build my own and cut my own... but you are too stupid to read and understand that it's winter here, i don't have a garage, and cutting mdf isn't exactly easy considering...Originally Posted by Hartman
you are a newb, with less then a 100 posts, so leave me The F alone
References:
Ali1, michaellane, cadillac114, chasinSKURT, DaRevrin, rhuff80, sam yung, The215, tukn18s, Xenophontos,nuboot,jfitz97,LuckyDerDer 2x
Originally Posted by psych0ticnemes1
X2
cutting an measuring wood isn't exactly the most fun thing to do when it's -10 degrees outside. i've built 3 in the past 2 weeks, thankfully the last week it hansn't been so cold.
but on the flipside, if your fingers a numb, it wont hurt as bad if you cut them off.![]()
I don't know how cold it is there, but you need to quit your *****ing.I was outside cutting wood in 4 degree weather.And that was for a decware wicked one, aka pretty much pure angles.I got all except for one piece cut that night.
What does it matter if he wants to cut it outside or get Lowes to cut it. He didnt ask should he go outside and cut it himself.
Originally Posted by squeak12
I never said he asked..........
Bookmarks