Need Help Buildign Box 4 Ford Ranger Single Cab

[BigEM]

As title says i need some help, i bought 2 kicker l5s 10", and need help building a Box for it, if anyone has done any porject as wut im doing please give me a hand, the space is limited so, help me out guys

thanks, EM

[amartin_72]

I have a custom made dual 10" sealed enclosure made for a 94 regular cab ranger id let it go for 10$ plus whatever it costs to ship. It is shaped like two boxes on each side with a connection/amp rack in the middle ( my ranger had an armwrest/console, idk if yours does, so the box has the space in the middle open for an amp to mount then the boxes are on the side. Grey carpeting.

[amartin_72]

But the box is only about .5 cubic feet each so unless you have a TON of power you arent going to get the low notes that you can out of a bigger enclosure but the transistent response is insane in such a small enclosure, especially with 10's. Oh it also has polyfill in it and it really did help the box hit lower when i put it in there.

[dakotus]

send a PM over to this kid...Droppedyota86 i thnk his nameis

he might be interested in that box

[95F150]

But the box is only about .5 cubic feet each so unless you have a TON of power you arent going to get the low notes that you can out of a bigger enclosure but the transistent response is insane in such a small enclosure, especially with 10's. Oh it also has polyfill in it and it really did help the box hit lower when i put it in there.

What are the exact measurements of the box? How deep is it altogethor, and are the holes round or square?

[BigEM]

does ur box have the holes for Kicker Solobarics?? or are the holes round?

thanks

[dont_smokerocks]

Does your ranger have a bench seat or buckets? I had one with a bench seat and 2 10's in it. I lost to many clicks on my seat and it was just to uncomfortable to drive for more than an hour. So I put bucket seats in and just had 1 10 in between the buckets. The box doubled perfectly as a arm rest. The point to all this rambeling is that your going to have to sacrifice leg room no matter what. Unless you look into doing a blow-through of course.

[johnson]

Everyone here knows what kind of space youre working with. Yeah.

[BigEM]

If i was to port my box, will it help the sound?? or is there not that much box space for a port box, i have the box made already. any ideas??

[BoomCrew]

i have a 95 ranger and i just cut the seat and am making a custom center console for my 10" Cvr, also i had to remount my amp to behind the drivers seat, i am hopeing that i get more bass out of this larger enclosure also i want more leg room, i stand 6.3 and its bad with it behind one of my seats.

[BigEM]

i already have the system set up, its 2 kicker l5s 10" on a box behind my seat, and i like how it sounds but was wondering if i was to build a ported box will it be better, let me know. any ideas??

thanks

[BigEM]

anyone ever done it for a ranger box?? i need help.

thanks