Box Braceing???

[DaGh0st]

i see evryone talking about it but how is this acomplished? all the walls doubled up with wood to make sure theres 0 flex in it?

[406er]

nope.its internall braces. like this



if u double up on the walls thats called double baffle

[DaGh0st]

ok and this does what? compared to not haveing it?

[406er]

if u dont have it. the wall could flex

[406er]

depending on the size of the box, it might not be needed. but i like to overbuild my boxes. it ensures the best quality posable!

[DaGh0st]

ok Thank you for your help...1 more thing would it matter if you just put a 1in board acrross the middle whould that be ok?

[406er]

ok Thank you for your help...1 more thing would it matter if you just put a 1in board acrross the middle whould that be ok?

i usaly try to brace the baffle/board in wich the sub actly sits on. if a pannles gonna flex it would be the front pannel. what kinda box are u building a brace might not be necessary

[DaGh0st]

15" SX with 8-1000 watts

[DaGh0st]

3/4 mdf 4ft^ @48hz

[406er]

3/4 mdf 4ft^ @48hz

man thats tuned HIGH, i would brace that up, and maybe double up the MDF on the front where the sub sits. also what kinda port. tube or slot

[DaGh0st]

slot port i was told to tune a lil higher i would really like to get into the 140's

[HiAmplidude]

[DaGh0st]

nice...is the black stuff to help get the tune you want?

[HiAmplidude]

Do you mean the foam? No. That enclosure is seled (no tuning per-say). The foam is to help with killing resonation.

[slim j]

very nice boxes 406...What do you use to cut the holes out?