CarAudio.com Elite
I have a custom box for my Z-71 that by all accounts should be a sealed unit as opposed to being ported like it is now. It also has the round inserts at each end for wire connections. What options are there to seal up the two 3.5" diameter and two 2" diameter holes to make it a sealed unit? Would round pieces of Plexi applied across them with sealant and screws do the job?
2001 Honda Civic EX Coupe
HU- Eclipse CD-5000
F&R Amp- MB Quart Qaa4250 1000 Watt 4-Channel
F- CDT HD52 5.25" With 1" Silk Tweets and M-6 6.5" Mids In The Doors(Three Way)
R- CDT M-6's
Sub Amp- Hifonics BXi2006D Brutus 2000 Watt D Mono
Subs- (2) FI-Q 12" in a 1.26 Cu^Ft./Per Side Unported Box
Battery- Kinetic 1400
House- Samsung 4665F/Def Tech Mythos 8's/Dayton 15" Sub Kit/Onkyo 605/Harmony 890
Refs: B-06stxf150, S-tmcilroy, B-lastcall
Sparkomatic Rep.
If the plexi is thick enough then that would work fine.
References - swc204, DiabaseM (carstereos.org), ckyskater733
NOODPOOPLER IS A PIECE OF LIE'ING BOTTOM FEEDER CRAP
CarAudio.com Elite
Is that better than using MDF on the inside? Should I also cut a piece to the same size diameter to go in the whole? Just a piece to the inside?
2001 Honda Civic EX Coupe
HU- Eclipse CD-5000
F&R Amp- MB Quart Qaa4250 1000 Watt 4-Channel
F- CDT HD52 5.25" With 1" Silk Tweets and M-6 6.5" Mids In The Doors(Three Way)
R- CDT M-6's
Sub Amp- Hifonics BXi2006D Brutus 2000 Watt D Mono
Subs- (2) FI-Q 12" in a 1.26 Cu^Ft./Per Side Unported Box
Battery- Kinetic 1400
House- Samsung 4665F/Def Tech Mythos 8's/Dayton 15" Sub Kit/Onkyo 605/Harmony 890
Refs: B-06stxf150, S-tmcilroy, B-lastcall
Sparkomatic Rep.
perosnnaly I woudl just use a peice of mdf ont he inside sicne it is cheaper nad oyu porlly have scraps around, seal and screw it on and it woudl be fine.
References - swc204, DiabaseM (carstereos.org), ckyskater733
NOODPOOPLER IS A PIECE OF LIE'ING BOTTOM FEEDER CRAP
Posting Permissions
 |
Bookmarks