Thanks to Moe Lester for the design... it's a ported box with 4.5 cu ft tuned at 33Hz.
Gonna have two 12" Alpine Type R (2005 version) pushed by an Orion 1200D; this baby should get LOUD. Going into the bed of a regular cab 2000 silverado and will be blown-through into the cab.
First off, the actual design of the box.
My workspace at home, consisting of a folding table, some smaller tables, and some bricks. Works great!
The cut boards laid out before I attempted some sort of cleanup.
The boards all cut out and stacked up, ready to be sanded some and glued/screwed together tomorrow. Labeled in MSPaint.
The front baffle. Gorgeous cutouts with the jigsaw :-)
I cut out a Chevy Logo that I'm gonna put on the back of the box, raised up with some bondo. Need to sand it up a little, but otherwise, looks pretty nice IMO.
Still have to finish cutting the dowel rods I'm using as bracing (the circles in the design picture) and all of the 45 degree braces.
Tomorrow night, after I get home from shool, I'll finish a couple cuts, sand a few pieces, and hopefully put it all together. Pics to come.
Later this week, but maybe not even until the weekend, I'm gonna resin all of the inside of the box(my first resin job). Pics of that to come, as well.