I would like to know how do you tune a port and what hz do you tune it to?also in my trunk i can fit an sub enclosure of:37"wx18"dx15 3/4"h,how much cu.ft for 2 12"s would that give me per chamber.
Realm Of Excursion
tuning a port/cu.ft??
I would like to know how do you tune a port and what hz do you tune it to?also in my trunk i can fit an sub enclosure of:37"wx18"dx15 3/4"h,how much cu.ft for 2 12"s would that give me per chamber.
the power of audio
you tune the enclosure by increasing or decreasing the length and width of the port.
and you want to select a frequency that will help you get the flattest frequency that you can get out of the sub. if you're in to spl. then you will tune it the a frequency that will accentuate a freq that the sub plays the loudest at.
AIM:powernaudio,yahoo:powernaudio,email address: powernaudio at gmail.com contact me if you need any help.
Portafolio
builds
more builds
saturn l300 build
videos
References:Mr.Loki,dubbinjet,trucktoy,fancynapkin, netherland,Datdudedru,hockey1playa33,
donbon86,PhatTonyDeMar,Saywhat?,vosschs,ChuckKlock er,budlightman361,baseballer1100,elslug,
bdogg321,projectpat06,eatank,BodegaBay,playboyclic ,cbrrocketrdr,iwanturmags,pboulos,DaBeholder,
bholtmeier,beatthis27,OldManTod,MTXman,Gianotti.
Realm Of Excursion
Re: tuning a port/cu.ft??
okay my 2 subs have a freq. range of 26-1000hz.how do i know what size port to use as far as width and height and how to determine the freq. range?I'm lost.I'm trying to prevent myself from buying a pre-fab box again and actually build one to the specifications of the subs.
Tangled Up in Blue
That frequency rating is not to be paid attention to, BTW...
Dollar Menu Millionaire
welcome to the forums! Its good to see another Kansas Citian!
Bought From:
Absolutnockout, zachzchw, Untouchable11, j3bus2k3 (x2), 92c1v1c, jeeper07, acubsfan, bkjt05, Goldenknob, Goindef154, Basscourt2009, TeamSouthrnBass, oldschoolboomer, 99grandprixGT
Sold to:
Gearguy2001 (American Bass SQ780)
Tw1st3d13 (2 Fi BL 15's)
the power of audio
well
you can use winISD to calculate the box internal volume and port configuration.
you can usre mobilede from mobile dynamics. to help you calculate the box phisical dimensions.
from the car audio help guide, link "carstereo.com"
the 12Volts site lots of info, link "12volts.com"
from crutchfield advisor, link "How to Build a Subwoofer Box"
and link "Finishing and Customizing Your Subwoofer Box"
and the last one, link "calculating enclosure volume"
i hope that helps
AIM:powernaudio,yahoo:powernaudio,email address: powernaudio at gmail.com contact me if you need any help.
Portafolio
builds
more builds
saturn l300 build
videos
References:Mr.Loki,dubbinjet,trucktoy,fancynapkin, netherland,Datdudedru,hockey1playa33,
donbon86,PhatTonyDeMar,Saywhat?,vosschs,ChuckKlock er,budlightman361,baseballer1100,elslug,
bdogg321,projectpat06,eatank,BodegaBay,playboyclic ,cbrrocketrdr,iwanturmags,pboulos,DaBeholder,
bholtmeier,beatthis27,OldManTod,MTXman,Gianotti.
Realm Of Excursion
you guys are awesome thanks a million
Posting Permissions
 |
Bookmarks