should i use 2 4" flared ports or one large slot port
the port area for 2 4" ports is 25.1 sq in.
and for the large slot port it is 32 sq in.
which will reduce port noise better? which will be louder?
this is for a type r 12 2.8 net
CarAudio.com Elite
should i use 2 4" flared ports or one large slot port
the port area for 2 4" ports is 25.1 sq in.
and for the large slot port it is 32 sq in.
which will reduce port noise better? which will be louder?
this is for a type r 12 2.8 net
2005 Civic SE
H/U: Pioneer DEH-P80MP
Front: Stock
Rear: Stock
Amp: Arc Audio Kar 1000.2T
Subs: Oz Matrix Elite 12 Dual 4
Box: 1.07 cu.ft sealed
Tangled Up in Blue
Neither will have an output advantage...if properly done.
Slot ports generally are harder to get a lot of port noise from...but don't take that to mean they won't make noise if improperly built.
Yea, thats Mecha Godzilla
Build it with the slot ports just because. Round ports **** me off
Comming Spring 2009
I make rear-loaded, double crabshell, isobaric enclosures.
Posting Permissions
 |
Bookmarks