+ Reply to Thread
Results 1 to 9 of 9

Reload Thread: Alarm Install Help

  1. #1
    RKaudioking's Avatar
    RKaudioking is offline Junior Member



    Join Date
    Nov 2013
    Location
    San Diego, CA
    Posts
    17
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Alarm Install Help

    Hello, I'm a junior installer and had a couple questions. First, there's an output on all alarms I see called 200mA Output, I've heard this is either a (validity??) output or an optional accessory output. What exactly is this output? Second, when an alarm only has one ignition, starter, and accessory output wire, and the car your installing it to has two of these wires, a relay is needed, correct? How are these wired?







  2. #2
    rfmayhem's Avatar
    rfmayhem is offline audio4life



    Join Date
    May 2012
    Location
    near your
    Posts
    824
    Post Thanks / Like
    Mentioned
    4 Post(s)

    Re: Alarm Install Help

    Quote Originally Posted by RKaudioking View Post
    Hello, I'm a junior installer and had a couple questions. First, there's an output on all alarms I see called 200mA Output, I've heard this is either a (validity??) output or an optional accessory output. What exactly is this output? Second, when an alarm only has one ignition, starter, and accessory output wire, and the car your installing it to has two of these wires, a relay is needed, correct? How are these wired?
    Yes there's outputs on all alarms,it cloud be validity or pulse or latch,the all cars only have one of each ign.,starter and accessory some time some cars have a second ign and u connect the pink/white to that wire it's the second ign.
    As far as the outputs they are used to control suff like trunk, window & sunroof and so on



    Hu:pioneer avh-p8400bh Hu:alpine ine-w900+kc400
    Front Stage:front 4 Rockford pro 8 inch mids & tweeter Front:SPR-60C
    rear2 Rockford pro 8 inch mids & tweeter Rear:SPR-69
    Sub Stage:mayhem 15 Sub stage:SWR-12D4
    Box: ported to 32hz box:??
    Electrical:3 xs d3100 amp bank & optima 3100 starter 270alt electrical 3100 260alt
    Amps: Rockford (2)2500bdcp ,(1)1000.4ad,(1)t400-4 & 360.2 Amps:pdx-1.1000,4.100

  3. #3
    RKaudioking's Avatar
    RKaudioking is offline Junior Member

    Threadstarter


    Join Date
    Nov 2013
    Location
    San Diego, CA
    Posts
    17
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Alarm Install Help

    But I'm doing a car that has two starter wires, not just one. And what is the pink/white wire?




  4. #4
    rfmayhem's Avatar
    rfmayhem is offline audio4life



    Join Date
    May 2012
    Location
    near your
    Posts
    824
    Post Thanks / Like
    Mentioned
    4 Post(s)

    Re: Alarm Install Help

    Quote Originally Posted by RKaudioking View Post
    But I'm doing a car that has two starter wires, not just one. And what is the pink/white wire?
    What's the make and model and year of car ? Pink/white is secon ign.wire



    Hu:pioneer avh-p8400bh Hu:alpine ine-w900+kc400
    Front Stage:front 4 Rockford pro 8 inch mids & tweeter Front:SPR-60C
    rear2 Rockford pro 8 inch mids & tweeter Rear:SPR-69
    Sub Stage:mayhem 15 Sub stage:SWR-12D4
    Box: ported to 32hz box:??
    Electrical:3 xs d3100 amp bank & optima 3100 starter 270alt electrical 3100 260alt
    Amps: Rockford (2)2500bdcp ,(1)1000.4ad,(1)t400-4 & 360.2 Amps:pdx-1.1000,4.100

  5. #5
    RKaudioking's Avatar
    RKaudioking is offline Junior Member

    Threadstarter


    Join Date
    Nov 2013
    Location
    San Diego, CA
    Posts
    17
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Alarm Install Help

    2010 Lexus Gs450h, my mistake, no second accessory, but there is two starter and ignition wires.




  6. #6
    rfmayhem's Avatar
    rfmayhem is offline audio4life



    Join Date
    May 2012
    Location
    near your
    Posts
    824
    Post Thanks / Like
    Mentioned
    4 Post(s)

    Re: Alarm Install Help

    Quote Originally Posted by RKaudioking View Post
    2010 Lexus Gs450h, my mistake, no second accessory, but there is two starter and ignition wires.
    What alarm do you have?



    Hu:pioneer avh-p8400bh Hu:alpine ine-w900+kc400
    Front Stage:front 4 Rockford pro 8 inch mids & tweeter Front:SPR-60C
    rear2 Rockford pro 8 inch mids & tweeter Rear:SPR-69
    Sub Stage:mayhem 15 Sub stage:SWR-12D4
    Box: ported to 32hz box:??
    Electrical:3 xs d3100 amp bank & optima 3100 starter 270alt electrical 3100 260alt
    Amps: Rockford (2)2500bdcp ,(1)1000.4ad,(1)t400-4 & 360.2 Amps:pdx-1.1000,4.100

  7. #7
    RKaudioking's Avatar
    RKaudioking is offline Junior Member

    Threadstarter


    Join Date
    Nov 2013
    Location
    San Diego, CA
    Posts
    17
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Alarm Install Help

    Not sure, some sort of viper model.




  8. #8
    rfmayhem's Avatar
    rfmayhem is offline audio4life



    Join Date
    May 2012
    Location
    near your
    Posts
    824
    Post Thanks / Like
    Mentioned
    4 Post(s)

    Re: Alarm Install Help

    Quote Originally Posted by RKaudioking View Post
    Not sure, some sort of viper model.
    Connect to the first starter wire ?



    Hu:pioneer avh-p8400bh Hu:alpine ine-w900+kc400
    Front Stage:front 4 Rockford pro 8 inch mids & tweeter Front:SPR-60C
    rear2 Rockford pro 8 inch mids & tweeter Rear:SPR-69
    Sub Stage:mayhem 15 Sub stage:SWR-12D4
    Box: ported to 32hz box:??
    Electrical:3 xs d3100 amp bank & optima 3100 starter 270alt electrical 3100 260alt
    Amps: Rockford (2)2500bdcp ,(1)1000.4ad,(1)t400-4 & 360.2 Amps:pdx-1.1000,4.100

  9. #9
    quick6gn's Avatar
    quick6gn is offline Junior Member



    Join Date
    Mar 2011
    Location
    North Carolina
    Posts
    5
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Alarm Install Help

    the pink/white is second ignition. On Toyota/Lexus and some nissan models you have to use the second starter as well. use a relay. 86 and 30 to 12 volt constant, 85 to purple wire on small 4 pin plug (second negative start output on all dei products), 87 to second start wire in car, disregard 87a. or down and dirty (works fine most of the time) use 2, 6 amp or larger diodes on your single purple start output from alarm to make 2 output wires and simply run one to each of the lexus' start wires. The second start is usually a cold start wire, the car will probably start fine using only the first start wire but the first time it's cold as fawk the car isn't going to start correctly. Also what bypass/integration module are you using for factory immobilizer bypass?




+ Reply to Thread

Similar Threads

  1. First time installating car alarm, need help
    By kentb in forum Car Video, Security and Electronics
    Replies: 3
    Last Post: 12-13-2008, 06:10 AM
  2. Clifford Solaris ALarm installation Help
    By bruther in forum Car Video, Security and Electronics
    Replies: 1
    Last Post: 07-03-2008, 11:33 PM
  3. help newbie with alarm install..
    By pl8rzclub in forum Car Video, Security and Electronics
    Replies: 3
    Last Post: 08-28-2005, 10:20 AM
  4. help with keyless entry alarm install
    By pl8rzclub in forum Wiring, Electrical and Installation Help
    Replies: 3
    Last Post: 08-27-2005, 11:04 PM
  5. alarm install help
    By ihaveallama in forum General Discussion
    Replies: 3
    Last Post: 10-01-2004, 01:04 AM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum