User Tag List

Closed Thread
Results 1 to 4 of 4

Reload Thread: Viper 5904 remote programming question

  1. #1
    quebert's Avatar
    quebert is offline Junior Member



    Join Date
    May 2013
    Location
    Riverside, CA
    Posts
    6
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Viper 5904 remote programming question

    I have a 1 way SST remote I want to program for it. I Googled this and all I am seeing is basic guides for systems. I'm not sure if the 5904's any different. Would I program it the same as the guides I'm seeing? They're saying with the doors open and car on press the valet button once and press a button on the FOB, do it again and press the 2nd FOB buttons. I'll do this for all 5 buttons? I'm hesitant to just jump in and try it in case it's not the same, I don't want to screw anything up.

    Also wondering about the valet button then FOB to program it. Does order matter? I mean let's say the 3rd time I'm pressing the valet one I should be doing the 3rd on the FOB right? seems like a silly question but I'm not sure if the FOB sends something specific so the module knows what was pressed, or it has to be done in an exact order.







  2. #2
    tommydh's Avatar
    tommydh is offline Senior VIP Member



    Join Date
    Mar 2012
    Location
    Baltimore, MD
    Posts
    470
    Post Thanks / Like
    Images
    5
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Viper 5904 remote programming question

    i think that works or if you know anyone tat has the bitwritrer that will program easier



    Pioneer DEH 80 PRS
    1 Sundown SD-2 10,
    Kicker SS56.2 components.(Soon to be changed out) Anyone with a set of these or maybe a single mid I'm looking
    Rockford Fosgate T-1000.1bd
    Pioneer GM6400f

    I am DH Audio.,
    This isn't baseball I'm the original DH Richard Ctranium

  3. #3
    quebert's Avatar
    quebert is offline Junior Member

    Threadstarter


    Join Date
    May 2013
    Location
    Riverside, CA
    Posts
    6
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Viper 5904 remote programming question

    Thanks for the reply, I don't know anyone with the Bitwriter and the shop isn't exactly close.

    I decided to follow the guide I saw and I can't get it working. I know the FOB's good becaiuse it worked with the previous brain. I get in the car, with the door open turn on the ignition. Then I press the valet button 2 times, holding it the 2nd time until it chirps. But when I press the lock button on the SST FOB it does nothing. I Googled and am not seeing any specific guides for the 5902/5904 and Viper seems to offer no install manuals what-so-ever. I have the remote in program mode or whatever it's called where you press the F button for 8 seconds.




  4. #4
    NFrazier's Avatar
    NFrazier is offline Senior VIP Member



    Join Date
    Oct 2006
    Location
    Massachusetts
    Posts
    350
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Viper 5904 remote programming question

    bitwriter actually doesn't have anything to really do with programming remotes; here's how to program.

    1. hold down F button on remote until the LED on the top lights up.
    2. open door, key to "on" position, within 5 seconds hit the programming button on the antenna once then hold until the horn honks.
    3. press the remote start button on the remote (hard), the LED will blink 3 times, if it doesn't push the remote start button again hard.
    4. hit F button on remote once, LED will blink.
    5. push and hold F button until the LED goes out.

    done, its actually rather easy.




Closed Thread

Similar Threads

  1. Viper 5904 temp sensor question
    By quebert in forum Car Video, Security and Electronics
    Replies: 1
    Last Post: 06-11-2013, 11:41 PM
  2. Viper Alarm (Problems Programming Remote)
    By HmoobSoCal in forum Car Video, Security and Electronics
    Replies: 9
    Last Post: 12-09-2009, 01:16 AM
  3. viper 791 remote programing
    By THUNDERBIRD in forum Car Video, Security and Electronics
    Replies: 7
    Last Post: 01-04-2007, 01:03 PM
  4. viper 791xv remote start question
    By Mike yayo in forum Car Video, Security and Electronics
    Replies: 7
    Last Post: 08-20-2006, 07:41 PM
  5. Viper 791xv (remote start) question
    By RobH415 in forum Car Video, Security and Electronics
    Replies: 6
    Last Post: 03-15-2004, 08:49 PM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum