Hornet 570T door locks not working
I have a 1993 Bucik Lesabre with TYPE-A door locks and I have hooked the Green wire from the Remote Starter to the Lt.Blue wire on the Lock/Unlock Switch and the Blue wire to the Black wire on the Switch,when I press the lock/unlock button on the transmitter I can hear the built in relay clicling and the locking unlocking does not work, So I put a DMM on the Green and Blue Wire to check for output voltage which I was able to read 11.59 vdc when lock/unlock button is pressed on the transmitter....So can anyone tell me do I need to add a relay and if so what module ?
Active Front Tweeters:Seas Neo Alumn.
Midbass:ID OEMs
Mids & Highs amp PPI DCX1000.4
Subs 2-12 Si Mags 2nd gen.
Box ported tuned to 34hz 2.17 cu.ft dual chambers
Sub amp Kicker KX2500.1
H/U:Alpine 9815
Doors and Trunk are deaden by SS
PPI MAN
REFS:2lows10, XylerB, Scoobasteve, Ksin291,TheLow, Amokie , MemphisSoul4u , TheHardKnoxLife , RydHy3845 ,GORDOS420 , Mihklo,Jameseypoo , integra88
Register To Reply
Bookmarks