Closed Thread
Results 1 to 2 of 2

Reload Thread: Viper 550ESP in a Camaro, remote start issues.

  1. #1
    JeffyZ33's Avatar
    JeffyZ33 is offline not******



    Join Date
    Aug 2004
    Location
    In A Tree
    Posts
    1,112
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Viper 550ESP in a Camaro, remote start issues.

    Heres the deal. I have a 94 Camaro Z28 that the previous owner put a Viper 550ESP in.

    Well, all of the features work. Lock/unlock, panic, hatch release, and remote start--to an extent. When i tap lock/unlock at the same time, the vehicle will start and run for about a second and die.

    There are a couple things I've gone over:

    Passkey bypass resistor, this should be good since the car will start with a key

    Hood button, when the hood is open, the remote start will not work at all

    I'm kind of at a loss, I'm about to take it up to the shop but they will charge something and I was hoping I could save some cash and fix it myself.





    Refs: TeamPSI, TooLowTooGo, HCCAFan




  2. #2
    KaeZoo's Avatar
    KaeZoo is offline CarAudio.com Elite



    Join Date
    May 2004
    Location
    Grand Rapids, MI
    Posts
    1,103
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Viper 550ESP in a Camaro, remote start issues.

    You may need to re-train the tach signal. Start the vehicle, and within about 5 seconds press and hold the valet switch. If the LED lights up and stays on, release the switch, turn the car off and try the remote start. If the LED doesn't light, then the tach sense wire isn't hooked up properly; you'll either need to reprogram the unit for voltage sense or rewire the tach.




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum