Is gibson a good/solid brand for exhaust and headers? they make a cool side exit dual tip exhaust for my truck and i'm interested in them. If you have any other suggestion i'm game to listen to em'.
Is gibson a good/solid brand for exhaust and headers? they make a cool side exit dual tip exhaust for my truck and i'm interested in them. If you have any other suggestion i'm game to listen to em'.
2006 Bright Island Blue 6s: stock 6 disc in dash, Hertz Hi-Energy 6.5" comps, MB Quart Ref 12", eclipse 5-channel sub amp.
Car mods: Lowered on Mazdaspeed springs with Koni Yellow shocks, Racing beat front/rear sway bars with AWR end links, LED turn signals, tail lights, front side markers, 18" ADR Cypher rims, 55w HID's in low beam and fogs, 5% tint all the way around. No go fast mods yet...tuning and Mazda6 don't go well together.
Steve a.k.a. ss3079: So this one lady goes, "These ignorant people who drive around blasting there music, they cant hear emergency vehicles"
So that set me off, and I said "Well then why do they let deaf people drive?"
AOL: JmKeenen
Look for soemthing stainless steel so they wont rust, and if not stainless alteast get coated. Are you looking more for peformance or sound?
R.I.P. 1991 Cadillac DeVille 07-31-05
R.I.P.2000 Chevy Camaro Z28
1999 Pontiac Trans Am Spun Bearing
2003 Subaru WRX
Ive got gibson headers on my whip, little pricey, but quality is there.
I've got a gibson dual exhaust on my truck and I love it, the only thing I would suggest is to get some ceramic paint and give it a couple coats before installing it.. it'll help with the rusting later down the road
Team Soundstream
i just put some stainless steel gibson headers 2 weeks ago and theyr awesome...but lik a couple of the guyz stated ceramic coated are better since they dont heat up as much as the chrome and stainless steel...theyr pricey but worth it
SYSTEM:98 silverado blowthru :2 sundown z/ns 12s/sundown saz 3500d
sundown 100.4/4 seleniums 6w4p/dd tweeters
xs power d3400/d3100(/knu/mechman 270a alt
refs: jfa1177, ds autosports, midnightg35x(x2), masta-ace, 350zspl, natisfynest, dan45hk, wgsj_fortvalley, infamous_e46, OldOneEye(x2), dbass, kroid777(x2), mr_kebo, sole cal, Toxic Tuan, 5cr4ppy, sacking74, sutherds, Louisiana_CRX(x2) , Louie68(local), manyhobbies , revrider1, 528hz, Jh8909, tristanmay, 5.3 bowtie, sundownz , ThumpinTitan , Jason19(oh well) , tv559, MyTrunkSlamz, sound_around, Ones, rocksolid84, Johnny Law.Lulz, db-r, AmiCreations, loudwhat?, Pillow, loondizie52, bowhunter715,RidnClean,jr711

i'm looking at the Gibson setup for my wrangler...but I'm going with the stainless so it doesn't rust in which ever exhaust I decide on
Current 2010 Louisiana USACi State Records :
Trunk 0-1000.................. 151.3
StreetBeat 2................... 145.6
Stock 1801-up.................153.8
SuperStock 1801-up..........154.2
Top three in 11 out of 26 power classes and Louisiana USACi Points Leader at 465
SYSTEM:98 silverado blowthru :2 sundown z/ns 12s/sundown saz 3500d
sundown 100.4/4 seleniums 6w4p/dd tweeters
xs power d3400/d3100(/knu/mechman 270a alt
refs: jfa1177, ds autosports, midnightg35x(x2), masta-ace, 350zspl, natisfynest, dan45hk, wgsj_fortvalley, infamous_e46, OldOneEye(x2), dbass, kroid777(x2), mr_kebo, sole cal, Toxic Tuan, 5cr4ppy, sacking74, sutherds, Louisiana_CRX(x2) , Louie68(local), manyhobbies , revrider1, 528hz, Jh8909, tristanmay, 5.3 bowtie, sundownz , ThumpinTitan , Jason19(oh well) , tv559, MyTrunkSlamz, sound_around, Ones, rocksolid84, Johnny Law.Lulz, db-r, AmiCreations, loudwhat?, Pillow, loondizie52, bowhunter715,RidnClean,jr711

I've heard good things about the JBA's also...its sorta a toss up between those two
Current 2010 Louisiana USACi State Records :
Trunk 0-1000.................. 151.3
StreetBeat 2................... 145.6
Stock 1801-up.................153.8
SuperStock 1801-up..........154.2
Top three in 11 out of 26 power classes and Louisiana USACi Points Leader at 465
I have installed over 100 Gibson exhaust systems and about 20 sets of headers. Never had a problem or complaint. The sound is nice, not loud at all, just deep and smooth. Adding the headers makes the tone change to a little sharper, a little louder, but even better.
The last one I did was a Hemi Ram. Log headers, 3" cat-back and we revamped the merge where the L and R banks come together with a merge pipe from Flowmaster. This truck picked up 2.5 mpg on the highway following this mod and it sounds great.
2000 GMC extended cab. Cheap Pioneer HU, cheaper speakers in the doors, stock speakers in the rear! Time for an install!
1980 Volvo 244. Nice Pioneer Premier HU, not much else to mention.
Bought from- MechMan, 528hz, exige, Papermaker, j3bus2k3, basebalz13, revrider1, FRITO, dacheatham, 350zspl
If we have done business please leave feedback!
Gibson makes nice stuff but the exhausts arent loud enough IMO. I have pace setter headers on my truck. The were cheap and they fit so im not complaining. If they arent coated deffinately put some paint on them
REFS; steinkea, sabreman001, Astyl, hazardous0388, Thetalkingshoe, blazinb2000, peas247, BassAddictJ, psychoacoustics, siddle, 01 S 10, BiC, tr10av
http://www.caraudio.com/forum/showth...09#post6699409
New build coming soon.
1999 F150 Reg Cab
H.U.- Deh-780mp
Front Stage-Powerbass 3xl
Front amp-?
Sub stage-2 12" ab hd
Enclosure- 4 @ 38 (1) 8" aero
Sub amp-?
Electrical- 2 runs of 2/0
Is this the Gibson Supertruck and what kind of truck is it?
That exhaust sounds best on Dodges. Don't know about Chevies, probably OK but I know it sounded like CRAP on the Fords I've heard running it. Gibson is not known for setting off car alarms but if you don't need to do that the quality of the sound, workmanship of the systems, and performance bumps are always good. I had a Dynomax Superturbo 13 inch on my 4.7 Dakota. Made it sound like a muted NASCAR truck on hard throttle but very deep at idle and light throttle.
Re: whats some good components?
Quote:
Originally Posted by deathpenalty18
Not an sq set up just want good sq speakers and tweets not interested in mids! And my sub is a fcking ia dp 18 with a memphis 4kw
Originally Posted by x1le
mids ARE speakers.
A component set = pair of midwoofer's and a pair of tweeter's
and nobody cares what your sub is.
Magnaflow makes a great exhaust.
I think there are better performance parts you can buy instead of headers... don;t get me wrong, they're good but I would get an intake and programmer first.
'10 F150 - 3Sixty.2 / MTX 2150x / MTX 275x / Blueprint XBL^2 Subs/ Boston SL80
REFs: flakko, Naxis2k1, JCJetta, jrgreene1968, NoPh33rRaCiNg, VTECnicalAccord, jadon087, sundownz, lmllopez, Toxic Tuan
double post
Sold To: Grinder1989, fasfocus00, JbIrD, Audiofreak, 99GrandprixGT, Curse-T, Fraze
Bought From: Eclipticvisions, groundpound4200, Orangelss
Feedback: http://www.caraudio.com/forum/showthread.php?t=429026&highlight=boxdgm
http://www.caraudio.com/forum/showthread.php?t=431603&highlight=boxdgm
If we have done business please post in my feedback.
Sold To: Grinder1989, fasfocus00, JbIrD, Audiofreak, 99GrandprixGT, Curse-T, Fraze
Bought From: Eclipticvisions, groundpound4200, Orangelss
Feedback: http://www.caraudio.com/forum/showthread.php?t=429026&highlight=boxdgm
http://www.caraudio.com/forum/showthread.php?t=431603&highlight=boxdgm
If we have done business please post in my feedback.
Bookmarks