WHat Class Will I Be In?????

**bumpin_8605** · 03-12-2003

i m thinkin of runnin 2 audiobahn 10" flame q subs w/ 2 profile CA1200 amps and im wondering wat class i would be put in. my friends say to go with a diff amp so i could be in a diff class. im open to any suggestions.

thanx in advance
Trent

**MikeofTulsa** · 03-13-2003

well what we need to know is how manuy watts that amp puts out @ 4ohms....im to lazy to check....but im guessing you'd be in the 1-2 1-600w class......

***Mark_ab*** · 03-13-2003

Originally posted by bumpin_8605
i m thinkin of runnin 2 audiobahn 10" flame q subs w/ 2 profile CA1200 amps and im wondering wat class i would be put in. my friends say to go with a diff amp so i could be in a diff class. im open to any suggestions.

thanx in advance
Trent

Depends on the organization

**bumpin_8605** · 03-13-2003

Originally posted by Goddyd4me
well what we need to know is how manuy watts that amp puts out @ 4ohms....im to lazy to check....but im guessing you'd be in the 1-2 1-600w class......

i think at 4 ohms the amp is 300x2 but im gonna run it bridged so it is 450x2

**MikeofTulsa** · 03-13-2003

well most organizations rate it @ 4ohms.....

**bumpin_8605** · 03-14-2003

Originally posted by Goddyd4me
well most organizations rate it @ 4ohms.....

well ok then the rms at 4 0hms is 300x2 and the max of 600

***Matador*** · 03-14-2003

profile CA1200 bridged puts 900rms @ 4ohms.

**bumpin_8605** · 03-14-2003

Originally posted by Matador
profile CA1200 bridged puts 900rms @ 4ohms.

alright then it is 900 rms at 4 ohms.

**ridered36** · 03-16-2003

I was told by Loyd that MECA uses maximum output at lowest ohm.

**bumpin_8605** · 03-16-2003

Originally posted by ridered36
I was told by Loyd that MECA uses maximum output at lowest ohm.

way ive read it and wat everyone else tells me is the output at 4ohms isnt that right

**ricerdude** · 03-16-2003

what is the # on the subs...are they the 1006s or what...

D

**bumpin_8605** · 03-16-2003

Originally posted by ricerdude
what is the # on the subs...are they the 1006s or what...

D

ya those r the ones

**FAM4LIFE** · 03-18-2003

Go to the following site:

www.mecacaraudio.com

Look under the League you would compete in and open the rules. It will give you the option to open a screen to help you figure out what class you would fall under.

I'm going MECA/DBSPLSO and I would be in class DB1 because I fall in pressure class (0-650)

Reload Thread: WHat Class Will I Be In?????

Thread Tools

WHat Class Will I Be In?????

Re: WHat Class Will I Be In?????

Bookmarks

Bookmarks

Posting Permissions