Results 1 to 5 of 5

Reload Thread: Sound Splinter RL-p 12" D2 Sub

  1. #1
    austin3119's Avatar
    austin3119 is offline Junior Member



    Join Date
    Sep 2005
    Location
    AZ
    Age
    40
    Posts
    9
    Post Thanks / Like
    Feedback Score
    1 (100%)
    Mentioned
    0 Post(s)

    Sound Splinter RL-p 12" D2 Sub

    I bought this sub off of EFFENDI, a member of this forum probably 5 years ago. I never installed it in my car and it has been sitting in a closet since I received.

    The box says Sound Splinter TC-9 D2.

    My username on Ebay is Austin3119 and my feedback is 100% (been on Ebay for many years).

    If you're looking at this you probably know what it is, but I've included the product description below.

    Price $175.00

    If you would like a package deal I will throw in a directed 1100d (1100 watts at 1 ohm) and a legacy wiring kit. Just let me figure out what a 1100d is going for these days. See my photobucket album of everything I will have for sale if you're interested. http://s742.photobucket.com/albums/x...o%20Equipment/

    Thanks






    Product Description
    By far SoundSplinters most popular product, this is a favorite among both car and home audio enthusiasts alike. For all sense and purpose, this is likely to be the most practical high excursion driver on the market. Its versatility and relatively shallow mounting depth allow it to be used in small spaces with moderate to high power. The Premium 12 is available in dual 4 and dual 2 voicecoil and will reach full excursion in most applications with between 600 and 700 watts.

    T/S Parameters
    Dual 2

    Qts:

    0.207

    Qes:

    0.226

    Qms:

    2.470

    Fs:

    23.433 Hz

    Re:

    3.7

    Ls:

    4.060 mH

    Lp:

    4.473 mH

    Rp:

    7.478

    Dia:
    (% shift)

    250 m
    32.2 %

    Vas:

    87.73 L

    Mms:

    177.9 g

    Cms:

    259.2 u

    Bl:

    20.70 T*m

    n0:

    479.9 m

    SPL:

    88.81 dB

    Sd:

    0.0471 m^2

    Xmag:

    26.0 mm

    Xmax:

    24.2 mm

    Key Features:

    3" Diameter Voicecoil
    Copper Shorting Ring
    Gold Plated Terminals
    Woven Lead Wires
    Dual Spiders
    Heat Sinked Cone
    Cast Steel Basket
    NBR Rubber Surround
    Thick Gap Plates
    Strong Epoxy Glues

    Sealed
    1.15 cu ft net volume

    Sealed
    0.66 cu ft net volume (bessel)

    Sealed
    0.2 cu ft net volume (enhanced Q)

    Vented
    1.5 cu ft net
    Tuned to 34 Hz
    20 sq. in. of Vent Area

    Vented
    1.5 cu ft net
    Tuned to 28 Hz
    20 sq. in. of Vent Area

    Vented
    2 cu ft net (EBS)
    Tuned to 20 Hz
    25 sq. in. of Vent Area
    Last edited by austin3119; 09-16-2010 at 04:05 AM.







  2. #2
    Raid3r89's Avatar
    Raid3r89 is offline Senior VIP Member



    Join Date
    May 2008
    Location
    indiana
    Posts
    159
    Post Thanks / Like
    Feedback Score
    4 (100%)
    Mentioned
    1 Post(s)

    Re: Sound Splinter RL-p 12" D2 Sub

    does the price include shipping?




  3. #3
    austin3119's Avatar
    austin3119 is offline Junior Member

    Threadstarter


    Join Date
    Sep 2005
    Location
    AZ
    Age
    40
    Posts
    9
    Post Thanks / Like
    Feedback Score
    1 (100%)
    Mentioned
    0 Post(s)

    Re: Sound Splinter RL-p 12" D2 Sub

    Not at the moment. I haven't listed everything I have yet, but check out the photo album I just put together on photobucket. I have a Directed 1100d, Orion 4002, set of CDT Cl-61's (brand new) and an amp wiring kit as well. Same story on all of this stuff. I bought it about 5 years ago thinking I would build a decent system for my car and never did. The Orion and Directed are refurbs I believe from Ike Sound. Thanks

    Stereo Equipment pictures by azmonsoon - Photobucket




  4. #4
    Raid3r89's Avatar
    Raid3r89 is offline Senior VIP Member



    Join Date
    May 2008
    Location
    indiana
    Posts
    159
    Post Thanks / Like
    Feedback Score
    4 (100%)
    Mentioned
    1 Post(s)

    Re: Sound Splinter RL-p 12" D2 Sub

    sent you a pm




  5. #5
    mrkNOw1's Avatar
    mrkNOw1 is offline Member



    Join Date
    Sep 2010
    Location
    Denver, CO
    Posts
    67
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Re: Sound Splinter RL-p 12" D2 Sub

    do u still have it?




Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may edit your posts
1e2 Forum