First off I have an mrp-m1000 that I got in a trade. NO ENDCAPS The guy said it had no output and thought the rca's were bad. It would power on but not output. I expected it to be 25-50 to get fixed.

I took it to Amprepairman to get fixed. He said it would power on but the power light flashed. He tested it and said it wasn't the rca's it was one whole side of the amp. He said the newer digital mono amps have two sides paralled for power.

When he Repaired it he went ahead and changed fets....etc on both sides to match and be more reliable.

Physically I would give it a 9/10

I want $175shipped

1000Wrms @ 2ohm

600Wrms @ 4ohm

Next I have an Alpine V12 5channel amp. Model MRV-F353

8.5/10 Physically

Needs touched up with black or something. Has a few little nicks

$135shipped

MANUAL

http://vault.alpine-usa.com/products...M_MRV-F353.PDF

Power Output: RMS Continuous Power (at 12.0V, 20 Hz to 20

kHz)

Per channel into 4 ohms

(CH1 – CH4) .............................. 30W, 0.08% THD

Per channel into 2 ohms

(CH1 – CH4) ................................. 40W, 0.3% THD

Bridged into 4 ohms

(CH1 – CH4) ................................. 80W, 0.3% THD

Power Output: RMS Continuous Power (at 12.0V, 20 Hz)

(CH5) 4 OHMS ..................................... 100W, 0.3% THD

Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20

kHz)

Per channel into 4 ohms

(CH1 – CH4) ................................ 50W, 0.08% THD

Per channel into 2 ohms

(CH1 – CH4) .................................. 60W, 0.3% THD

Bridged into 4 ohms

MRV-F353 (CH1 – CH4) ............................... 120W, 0.3% THD

Power Output: RMS Continuous Power (at 14.4V, 20 Hz)

4 ohms

(CH5) ..................................... 150W, 0.3% THD

__________

___________________

_______________________________

_____________________________________________

Thanks,

Curtis

## Bookmarks