+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 20

Reload Thread: Austin175s 03 Lancer ES Trunk build.

  1. #1
    Austin175's Avatar
    Austin175 is offline CarAudio.com Elite



    Join Date
    Jan 2010
    Location
    Burlington,Ia
    Posts
    837
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    226 Post(s)

    Austin175s 03 Lancer ES Trunk build.

    Got some pictures of the build I'll upload more as I get further into the build. Equipment being used will be listed as below......

    HU-880prs
    Subs- DC xlm2 12s
    Box-3.33cf 34hrtz
    Mids/highs- SSA Evil 6.5s & tweets(when released) or Nendo Pwx's an FT1 tweets undecided so far
    Sub Amp- AA 3800.1
    Mids/high amp- Nendo 1000C4
    Wire- AT 1/0 CCA( for now tell welding wire comes in)
    Alt- custom large case US Alt 340a
    Batteries- 4-5 xs xp3000s or might lithium (undecided)
    Sound Deadner- Vibraflex & sound or second skins




















    2003 Lancer ES
    H/U- Pioneer 880prs
    Mids/Highs- ????
    Sub Stage- DC Xlm2 12s(soon to be FI BTL Neo's)
    Mids/Highs Amp- Crescendo 1000C4
    Sub Amp- 2 Ampere 3800.1s
    Wiring- Welding 2/0, Welding 4g & Welding 8g
    Alt-????
    Batteries- 4 Xs Xp3ks & 1 Lithium
    Enclosure- 3.33Cf tuned to 34hrtz

  2. Likes LoudSound liked this post



  3. #2
    Austin175's Avatar
    Austin175 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Jan 2010
    Location
    Burlington,Ia
    Posts
    837
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    226 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.

    Will post more pics on my lunch



    2003 Lancer ES
    H/U- Pioneer 880prs
    Mids/Highs- ????
    Sub Stage- DC Xlm2 12s(soon to be FI BTL Neo's)
    Mids/Highs Amp- Crescendo 1000C4
    Sub Amp- 2 Ampere 3800.1s
    Wiring- Welding 2/0, Welding 4g & Welding 8g
    Alt-????
    Batteries- 4 Xs Xp3ks & 1 Lithium
    Enclosure- 3.33Cf tuned to 34hrtz

  4. Likes LoudSound liked this post
  5. #3
    Austin175's Avatar
    Austin175 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Jan 2010
    Location
    Burlington,Ia
    Posts
    837
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    226 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.






    2003 Lancer ES
    H/U- Pioneer 880prs
    Mids/Highs- ????
    Sub Stage- DC Xlm2 12s(soon to be FI BTL Neo's)
    Mids/Highs Amp- Crescendo 1000C4
    Sub Amp- 2 Ampere 3800.1s
    Wiring- Welding 2/0, Welding 4g & Welding 8g
    Alt-????
    Batteries- 4 Xs Xp3ks & 1 Lithium
    Enclosure- 3.33Cf tuned to 34hrtz

  6. Likes LoudSound liked this post
  7. #4
    Austin175's Avatar
    Austin175 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Jan 2010
    Location
    Burlington,Ia
    Posts
    837
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    226 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.







    That's all I got so far this week gutting an cutting the car, the amp an wires in that list pic are from the person before me so running 1/0 wire Monday, temporarily put the subs/amp in to see how it sounds & plan out where all I need to sound deaden an where exactly batts are going to go.



    2003 Lancer ES
    H/U- Pioneer 880prs
    Mids/Highs- ????
    Sub Stage- DC Xlm2 12s(soon to be FI BTL Neo's)
    Mids/Highs Amp- Crescendo 1000C4
    Sub Amp- 2 Ampere 3800.1s
    Wiring- Welding 2/0, Welding 4g & Welding 8g
    Alt-????
    Batteries- 4 Xs Xp3ks & 1 Lithium
    Enclosure- 3.33Cf tuned to 34hrtz

  8. #5
    BSchrowang's Avatar
    BSchrowang is online now Budget Builder



    Join Date
    Apr 2016
    Location
    Peru Illinois
    Posts
    418
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    171 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.

    Looks good so far. Whats the octo port for?



    2010 Ford Crown Victoria Police Interceptor:
    2 American Bass XFL 15"s
    8 cubic foot box
    Taramps HD 3000 at 1 ohm
    Soundbox 1/0 CCA wire
    200 amp police alternator

  9. #6
    Eggroll's Avatar
    Eggroll is offline RingsOfSaturn>your music



    Join Date
    Oct 2014
    Location
    Death Metal > Your Music
    Age
    21
    Posts
    533
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    256 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.

    Trunk builds keep up the good work and pics



    2 12" Ethos; DC 320; XSD34, Diehard 34; Four 2/0 Eb Flex runs.
    Sold To: FineLinePimpin. Bought From: PapaGeno21

    ~2013 Nissan Altima 2.5 SV ~ South Florida~

  10. #7
    Austin175's Avatar
    Austin175 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Jan 2010
    Location
    Burlington,Ia
    Posts
    837
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    226 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.

    Quote Originally Posted by BSchrowang View Post
    Looks good so far. Whats the octo port for?
    I was originally going to use the octo port but after I had bought it an had it made that it wasnt going to fit like I wanted because I didn't want to do subs up lol so I guess I just have it for another build or something or just might trade it if someone is interested.
    Last edited by Austin175; 02-05-2017 at 07:51 AM.



    2003 Lancer ES
    H/U- Pioneer 880prs
    Mids/Highs- ????
    Sub Stage- DC Xlm2 12s(soon to be FI BTL Neo's)
    Mids/Highs Amp- Crescendo 1000C4
    Sub Amp- 2 Ampere 3800.1s
    Wiring- Welding 2/0, Welding 4g & Welding 8g
    Alt-????
    Batteries- 4 Xs Xp3ks & 1 Lithium
    Enclosure- 3.33Cf tuned to 34hrtz

  11. #8
    Austin175's Avatar
    Austin175 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Jan 2010
    Location
    Burlington,Ia
    Posts
    837
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    226 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.

    Quote Originally Posted by Eggroll View Post
    Trunk builds keep up the good work and pics
    Thanks bud got alot more coming in the next few weeks as long as the weather permits today is prepping wire, if it warms up some I'll try an get out to do my big 3 an get these + & - runs in as well.

    Also for anyone wondering the box is braced these were pics before we put them in I still need to sand in some spots & resin/paint the box when it gets warmer.
    Last edited by Austin175; 02-05-2017 at 07:50 AM.



    2003 Lancer ES
    H/U- Pioneer 880prs
    Mids/Highs- ????
    Sub Stage- DC Xlm2 12s(soon to be FI BTL Neo's)
    Mids/Highs Amp- Crescendo 1000C4
    Sub Amp- 2 Ampere 3800.1s
    Wiring- Welding 2/0, Welding 4g & Welding 8g
    Alt-????
    Batteries- 4 Xs Xp3ks & 1 Lithium
    Enclosure- 3.33Cf tuned to 34hrtz

  12. #9
    Austin175's Avatar
    Austin175 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Jan 2010
    Location
    Burlington,Ia
    Posts
    837
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    226 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.

    Will get pics of some more stuff today after work but I'm not sure where to start next right now got about $1k I can spend.



    2003 Lancer ES
    H/U- Pioneer 880prs
    Mids/Highs- ????
    Sub Stage- DC Xlm2 12s(soon to be FI BTL Neo's)
    Mids/Highs Amp- Crescendo 1000C4
    Sub Amp- 2 Ampere 3800.1s
    Wiring- Welding 2/0, Welding 4g & Welding 8g
    Alt-????
    Batteries- 4 Xs Xp3ks & 1 Lithium
    Enclosure- 3.33Cf tuned to 34hrtz

  13. #10
    Austin175's Avatar
    Austin175 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Jan 2010
    Location
    Burlington,Ia
    Posts
    837
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    226 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.

    Haven't had much time to work on this but it's starting to get warmer here(Iowa) so yesterday I did some stuff lol.

    Got some stuff in the mail 12g SkyHigh remote wire, SkyHigh 20ft RCA's, SkyHigh 1/0 fuse holder, 2 350a fuses, & 25ft of SkyHigh ofc 8g 12.5ft black & 12.5ft green.



    Also got some IllZcustoms green & black dual inputs the anodizing doesn't feel or look cheap which is nice I just wish they were offset



    Also going with a new box design is from the great CSCStang



    An finally ran the remote/RCA's/ power/ & grounded to the frame & cut out the rest the opening behind the seats, next is to sand down the inside the trunk an repaint it then order vibraflex an cut the false floor






    2003 Lancer ES
    H/U- Pioneer 880prs
    Mids/Highs- ????
    Sub Stage- DC Xlm2 12s(soon to be FI BTL Neo's)
    Mids/Highs Amp- Crescendo 1000C4
    Sub Amp- 2 Ampere 3800.1s
    Wiring- Welding 2/0, Welding 4g & Welding 8g
    Alt-????
    Batteries- 4 Xs Xp3ks & 1 Lithium
    Enclosure- 3.33Cf tuned to 34hrtz

  14. #11
    BOOMINGRANDPA's Avatar
    BOOMINGRANDPA is offline CarAudio.com Elite



    Join Date
    Jan 2017
    Location
    NC
    Posts
    1,144
    Post Thanks / Like
    Images
    11
    Mentioned
    10 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    406 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.

    yeah that octo port is nice., pic of that completed box looks like my old one (in my gallery with black e designs in it) but your is double thick and bigger port..



    KENWOOD X301 HU (awesome), PIONEER CHAMP PRO 3003d4 12, 1.65 CF SLOT PORTED TUNED TO 35 HZ, PRECISION POWER P1000, SOUNDQUBED 6.5" xover (hu)

  15. #12
    Austin175's Avatar
    Austin175 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Jan 2010
    Location
    Burlington,Ia
    Posts
    837
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    226 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.

    Quote Originally Posted by BOOMINGRANDPA View Post
    yeah that octo port is nice., pic of that completed box looks like my old one (in my gallery with black e designs in it) but your is double thick and bigger port..
    Yea it was just to much weight so having a friend cut the design from Stang out of birch an going to assemble it this weekend, the octo is nice but I have no use for it now lol maybe find something to do with it.



    2003 Lancer ES
    H/U- Pioneer 880prs
    Mids/Highs- ????
    Sub Stage- DC Xlm2 12s(soon to be FI BTL Neo's)
    Mids/Highs Amp- Crescendo 1000C4
    Sub Amp- 2 Ampere 3800.1s
    Wiring- Welding 2/0, Welding 4g & Welding 8g
    Alt-????
    Batteries- 4 Xs Xp3ks & 1 Lithium
    Enclosure- 3.33Cf tuned to 34hrtz

  16. #13
    Austin175's Avatar
    Austin175 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Jan 2010
    Location
    Burlington,Ia
    Posts
    837
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    226 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.

    So Thursday night went an got wood glue, paint brushes, screws etc at lowes also spent 1hr & 38min with my gf at the paint counter cause the clerk was determined to get a green paint as close to my dual inputs went through 2 whole cases of those sample bottles lol. Yesterday started assembling the box:

    Got back/sides/corner 45s in



    Today mocking up the faces an port looking good so far for my 1st build all by myself If I don't say.




    2003 Lancer ES
    H/U- Pioneer 880prs
    Mids/Highs- ????
    Sub Stage- DC Xlm2 12s(soon to be FI BTL Neo's)
    Mids/Highs Amp- Crescendo 1000C4
    Sub Amp- 2 Ampere 3800.1s
    Wiring- Welding 2/0, Welding 4g & Welding 8g
    Alt-????
    Batteries- 4 Xs Xp3ks & 1 Lithium
    Enclosure- 3.33Cf tuned to 34hrtz

  17. #14
    Austin175's Avatar
    Austin175 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Jan 2010
    Location
    Burlington,Ia
    Posts
    837
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    226 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.

    Got my jasper guide an router today still waiting on my 1/4 spiral down bit from mobile soulutions( should be tomorrow) will have more pics an updates this weekend



    2003 Lancer ES
    H/U- Pioneer 880prs
    Mids/Highs- ????
    Sub Stage- DC Xlm2 12s(soon to be FI BTL Neo's)
    Mids/Highs Amp- Crescendo 1000C4
    Sub Amp- 2 Ampere 3800.1s
    Wiring- Welding 2/0, Welding 4g & Welding 8g
    Alt-????
    Batteries- 4 Xs Xp3ks & 1 Lithium
    Enclosure- 3.33Cf tuned to 34hrtz

  18. #15
    BOOMINGRANDPA's Avatar
    BOOMINGRANDPA is offline CarAudio.com Elite



    Join Date
    Jan 2017
    Location
    NC
    Posts
    1,144
    Post Thanks / Like
    Images
    11
    Mentioned
    10 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    406 Post(s)

    Re: Austin175s 03 Lancer ES Trunk build.

    Quote Originally Posted by Austin175 View Post
    Got my jasper guide an router today still waiting on my 1/4 spiral down bit from mobile soulutions( should be tomorrow) will have more pics an updates this weekend
    omg wiping drool away.. nice amps, box too..



    KENWOOD X301 HU (awesome), PIONEER CHAMP PRO 3003d4 12, 1.65 CF SLOT PORTED TUNED TO 35 HZ, PRECISION POWER P1000, SOUNDQUBED 6.5" xover (hu)

+ Reply to Thread
Page 1 of 2 1 2 LastLast

User Tag List

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may edit your posts
1e2 Forum